Wave breaking typically occurs when the water depth is approximately equal to or less than 1.3 times the wave height. Therefore, a wave with a 5 meters height would likely begin to break in water depths of around 3.85 meters or less.
Generally, a wave will start breaking when the water depth is about 1.3 times the wave height. So, in water that is 7.8 meters deep, a wave would likely start breaking around 6 meters in height.
A wave typically breaks when its wave base reaches the depth of half its wavelength. Therefore, for a wave with a wavelength of 3 meters, it would break when the water depth is approximately 1.5 meters. The distance from the shore at which this occurs depends on the slope of the seafloor.
The titan imploded at a depth of 3,800 meters.
The highest height you can safely jump from into water depends on various factors such as the depth of the water, your diving skills, and the type of entry. Generally, it is recommended to not jump from a height higher than 60 feet (18 meters) to ensure safety and avoid serious injuries.
The depth of a cube is typically referred to as the distance from one face to the opposite face, measured perpendicular to the faces. In a cube, all sides are equal, so the depth would be the same as the height or width of the cube.
Generally, a wave will start breaking when the water depth is about 1.3 times the wave height. So, in water that is 7.8 meters deep, a wave would likely start breaking around 6 meters in height.
A meter is not a refrigerator.My refirgerator has a height of 1.8 meters, a width of 0.8 meters and a depth of 0.6 meters.
To determine the maximum depth at which a wave will not be refracted, we can use the rule of thumb that the water depth should be at least half the wavelength. If the wavelength is ( \lambda ) meters, the critical depth for minimal refraction would be ( \lambda / 2 ) meters. Therefore, a wave will not be refracted in water with a depth greater than ( \lambda / 2 ) meters.
When the depth is less than 1/2 a wave height, the wave crests fall forward, forming surf. It is said to Break.
the height is 241 meters tall but i forget the measurement in feet. that's all i know.
Square meters measure area, while cubic meters measure volume. To convert square meters to cubic meters, you need a height or depth measurement to provide the third dimension. Without that additional dimension, you cannot convert square meters directly to cubic meters. If you had a height, you would multiply the area (2000 square meters) by that height to get the volume in cubic meters.
You cannot directly convert square meters to cubic meters as they measure different things. Square meters measure area, while cubic meters measure volume. To convert square meters to cubic meters, you would need to know the height or depth of the area you are measuring. Then you would multiply the area in square meters by the height or depth in meters to get the volume in cubic meters.
A wave typically breaks when its wave base reaches the depth of half its wavelength. Therefore, for a wave with a wavelength of 3 meters, it would break when the water depth is approximately 1.5 meters. The distance from the shore at which this occurs depends on the slope of the seafloor.
Without knowing an extra dimension with difficulty.Square meters are a measure of area and have twodimensions.Cubic feet are a measure of volume and require three dimensions.1 square meter ~= 10.764 square feet.
The Indian Ocean's depth is 3,890 meters.
width, depth and height
height and depth of a tree is equal... but height and depth of a node is not equal because... the height is calculated by traversing from leaf to the given node depth is calculated from traversal from root to the given node.....