0
What else can I help you with?
What is the static pressure of propane in pounds at 70 degrees?
The static pressure of propane at 70 degrees Fahrenheit will vary depending on the volume of propane and the specific conditions of the container it is in. To calculate the static pressure, you can refer to a propane pressure-temperature chart or use the ideal gas law equation (PV = nRT) with the known values of volume, temperature, and the number of moles of propane.
What state is propane in a zero degrees Celsius?
At ordinary atmospheric pressures propane is in the gas phase at 0C.
How much does a small propane cylinder weigh empty?
There is a fair amount of variation, but the standard small 16.4oz (1 lb) propane cylinder usually weighs just about a pound when empty (Tare weight, or the weight of the container itself). It is then usually charged with 16oz (by weight) of liquid propane for a total of around 32iz (2 lb).In SummaryTare Weight: 16oz (weight of the container/bottle)Net Weight: 16oz (weight of the liquid propane fuel)Gross Weight 32oz (weight of a full bottle)or in more practical terms, the closer your bottle is to weighing 1 lb, the closer you are to empty.
How much propane is used to heat a 50 gallon water heater from 75 degrees to 105 degrees?
The amount of propane needed to heat a 50 gallon water heater from 75 degrees to 105 degrees would depend on factors such as the efficiency of the water heater, the starting temperature of the water, and the ambient temperature. It is difficult to provide an exact amount without this information.
How much does 25 gallons of liquid propane gas weigh?
5.1 lb
At what temperature does propane freeze?
Propane freezes at a temperature of -306.4 degrees Fahrenheit (-188 degrees Celsius).
What is the difference in temperature performance between Mapp gas and propane?
Mapp gas burns hotter than propane, reaching temperatures of around 3,730 degrees Fahrenheit compared to propane's 3,600 degrees Fahrenheit.
What temperature does propane burn?
-187.6 degrees Centigrade (-305.68 degrees Fahrenheit) is the melting point of propane. Anything below that, and you've got a frozen propane bottle. A slightly more practical question, however, is: At what temperature would a propane bottle fail to dispense its contents? The boiling point of propane is -42.09 degrees Centigrade (-43.76 degrees Fahrenheit). So anything below that temp, and the liquid propane won't boil off inside the bottle to dispense when you open the valve. You'd be able to pour it out like a very cold glass of water.
What is the condensation point for propane?
The condensation point for propane is approximately -42 degrees Celsius (-43.6 degrees Fahrenheit). At this temperature, propane gas becomes a liquid.
What is the difference in temperature performance between propane and MAPP gas?
Propane has a lower maximum flame temperature of around 3,600 degrees Fahrenheit, while MAPP gas can reach temperatures of up to 3,720 degrees Fahrenheit, making MAPP gas hotter than propane.
Can propane gas freeze in cold temperatures?
Yes, propane gas can freeze in extremely cold temperatures, typically below -44 degrees Fahrenheit.
How many pounds are in a 47 gallon propane tank?
Propane weighs about 4.2 pounds per US gallon, at 60 degrees Fahrenheit. Propane expands 1.5% per 10 degrees F.answered by Special:ContributionsSo you take 4.2 * 47 = about 197.4
What is condensation temperature of propane?
Dew point is specified for a given concentration of water in atmosphere.
What temperature will a lpg 20 pound tank freeze or not work from be left outside?
Propane freezes at -40 degrees C (which also happens to be -40 degrees Fahrenheit).
1 pound propane liquidat 60 degree Fahrenheit will vapour to produce?
I have no idea but i thunk i know it but i will not share it with u
How many pounds of propane can a 20lb propane cylinder safely hold?
A 20lb propane cylinder typically holds around 4.7 gallons of propane. Propane weighs about 4.2 pounds per gallon, so a 20lb cylinder can hold roughly 17-18 pounds of propane when full.
How do you find how much propane you have left using hot water and how does it work?
By pouring hot water on a propane cylinder you are heating the metal cylinder. The liquid propane in the cylinder is cold and forms condensation on the outside of the cylinder showing the level of propane remaining in the tank much like condensation forming on a glass of ice water on a hot day.
