0
What else can I help you with?
How many btus to reduce water temperature one degree?
That depends on how much water you have, and what temperature it's starting at.If you have one pound of water, and its temperature is 40° F, then it will cool to 39° Fif you pull exactly one BTU of heat out of it.Different amounts of water, or different starting temperature . . . different amounts of heat.
How many btus to heat water 10 degrees?
To raise the temperature of 1 pound of water by 1 degree Fahrenheit, it requires 1 BTU (British Thermal Unit). Therefore, to heat water by 10 degrees, it would require 10 BTUs per pound of water. This value may vary slightly depending on the specific heat capacity of the water.
How many btu's must be removed from one pound of water at 200f for it to end up as ice at 30f?
To convert water at 200°F to ice at 30°F, you need to remove 1 BTU to cool water from 200°F to 32°F to become ice. Then, you need to remove 144 BTUs to cool the ice from 32°F to 30°F. So, total BTUs needed to remove from one pound of water at 200°F to end up as ice at 30°F is 144 + 1 = 145 BTUs.
How many btu for cooling a 20x12 room is?
To calculate the BTUs needed to cool a room, multiply the square footage of the room by 20 (which is the recommended cooling capacity in BTUs per square foot). In this case, for a 20x12 room (240 square feet), you would need approximately 4,800 BTUs to effectively cool the space.
How many BTUs are required to raise the temperature of 15 pounds of water from 100F to 120F?
To calculate the BTUs required to raise the temperature of water, you can use the formula: BTUs = (pounds of water) x (temperature change in °F) x (1 BTU). For 15 pounds of water going from 100°F to 120°F, the calculation would be: BTUs = 15 pounds x 20°F x 1 BTU = 300 BTUs.
How many btus to reduce water temperature one degree?
That depends on how much water you have, and what temperature it's starting at.If you have one pound of water, and its temperature is 40° F, then it will cool to 39° Fif you pull exactly one BTU of heat out of it.Different amounts of water, or different starting temperature . . . different amounts of heat.
How many BTUs are needed to cool 500 sq ft?
12,000
How many BTUs needed to cool 500 square feet?
13000
How many BTUs do I need to cool a 20x9 room?
A romm 20x9 is 180 square feet. You will need 5000 to 6000 BTUs for this.
How many btu's in office water-cooler?
There are no BTUs in an office water-cooler. But you can calculate how many BTUs are removed by the cooler. One BTU or British Thermal Unit is the amount of heat energy required to raise the temperature of one pound of water one degree Fahrenheit. There for when you remove one BTU you are lowering one pound of water one degree Fahrenheit. So if you know how many pounds of water you have and the temperature of the water you start with and the temperature of the water comming out of the cooler you can calculate how many BTUs the cooling unit of the water cooler has removed. BTU=Temp1 - Temp 2 X LB water
How many sq ft will 13500 btus cool?
up to 500 sq.ft.
How many BTUs does it take to heat one pound of water from 80 degree F to 212 degree F?
212 - 80 = 132 degrees temperature increase x 1 pound water = 132 BTU
How many BTUs will it take to change 1 gallon of water at 32 degrees to ice at 32 degrees?
You would need to remove approximately 1200 BTUs of heat to convert a gallon of water to ice. There are 8.34 lb in a gallon of water, which converting to lb-moles is 0.463. The latent heat of crystallization for water is -2583.4 BTU/lb-mole. Multiplying the two together and you get -1197 BTUs, which means you need to remove that amount of heat to convert the gallon of water to ice.
How many BTUs to cool a room?
12square meter and 12 sq feet depth in how many use cement
How many btus to heat water 10 degrees?
To raise the temperature of 1 pound of water by 1 degree Fahrenheit, it requires 1 BTU (British Thermal Unit). Therefore, to heat water by 10 degrees, it would require 10 BTUs per pound of water. This value may vary slightly depending on the specific heat capacity of the water.
How many btus does it take to raise half pound of water 1 degree?
One BTU is the energy required to raise one pound of water by one degrees. Therefore, your answer would be one half.
How many btu's must be removed from one pound of water at 200f for it to end up as ice at 30f?
To convert water at 200°F to ice at 30°F, you need to remove 1 BTU to cool water from 200°F to 32°F to become ice. Then, you need to remove 144 BTUs to cool the ice from 32°F to 30°F. So, total BTUs needed to remove from one pound of water at 200°F to end up as ice at 30°F is 144 + 1 = 145 BTUs.
