if you mean mg, there are 1,000,000mg in kg. A weight is closely related to 3 dimensions of length so you can't associate one length i.e. m, metre to kg
The momentum of 5 kg m/s is equivalent to 25 joules.
I don't think there is any equivalency.... A watt isW = J/s = (N*m)/s = ((kg*(m/s^2))*m)/s = kg*(m^2))/(s^3)Therefore: W*kg = (kg^2)*((m^2)/(s^3)) which is not equal to N = kg*(m/s^2)I guess the closest answer would be :1 kg*W = (1 kg*m/s) N or1 kg*W = (1 N*s) N
To convert megapascals (MPa) to kilograms-force meters (kg-m), you can use the formula: 1 MPa = 10197.1621 kg-m. So, you would multiply the megapascal value by 10197.1621 to get the equivalent value in kg-m.
P (momentum) = M * V 703 * 20.1 = 14130.3 kg m/s
The weight of 0.7 kg of gold is m = 0.7 kg. To convert this to force in Newtons, we use the formula F = m*g, where g is the acceleration due to gravity (approximately 9.81 m/s^2). Calculating, F = 0.7 kg * 9.81 m/s^2 ≈ 6.887 N.
To convert cubic meters (m³) of M sand to kilograms (kg), you need to know the density of M sand, which typically ranges from 1,400 to 1,600 kg/m³. Assuming an average density of 1,500 kg/m³, 2.83 m³ of M sand would weigh approximately 4,245 kg (2.83 m³ × 1,500 kg/m³). Adjust the density used for more precise calculations based on specific sand characteristics.
1000
The momentum of 5 kg m/s is equivalent to 25 joules.
It depends on the density of the substance. To convert kg/m³ to kg/m, you would need to multiply the density by the volume. For example, if the density is 1000 kg/m³, then there would be 40,000 kg in a cubic meter (1000 kg/m³ * 1 m³ = 40,000 kg).
one is the answer.because "kg"is just a shortcut of kilogram.the m is in the complete word "kilogram:
That depends on the sand. Choose one of these densities: Sand, wet - 1920 kg/m³ Sand, wet, packed - 2080 kg/m³ Sand, dry - 1600 kg/m³ Sand, loose - 1440 kg/m³ Sand, rammed - 1680 kg/m³ Sand, water filled - 1920 kg/m³ Now put it into the following formula: kilograms of sand / density = cubic meters of sand
Kg is a unit of mass, while m is a unit of distance, so the conversion you request is not possible.
I don't think there is any equivalency.... A watt isW = J/s = (N*m)/s = ((kg*(m/s^2))*m)/s = kg*(m^2))/(s^3)Therefore: W*kg = (kg^2)*((m^2)/(s^3)) which is not equal to N = kg*(m/s^2)I guess the closest answer would be :1 kg*W = (1 kg*m/s) N or1 kg*W = (1 N*s) N
m = ( 8.17 kg ) ( 1000 g /kg ) ( 100 cg / g ) m = 8.17 x 10^5 cg <---------------
Indeterminate value! You can't convert from kg to m³ since kg measures mass while m³ measures volume. These units are thus incompatible to each other.
Yes engine oil has density but the temperature varies. For 0 degrees Celsius it is 899.0 kg/m^3. For 20 degrees it is 888.1 kg/m^3. For 40 degrees it is 876.0 kg/m^3. For 60 degrees it is 863.9 kg/m^3. For 80 degrees it is 852.0 kg/m^3. For 100 degrees it is 840.0 kg/m^3. For 120 degrees it is 828.9 kg/m^3. For 140 degrees it is 816.8 kg/m^3. For 150 degrees it is 810.3 kg/m^3.
8mm dia : 0.395 kg/m 10mm dia : 0.617 kg/m 12mm dia : 0.888 kg/m 16mm dia : 1.579 kg/m 20mm dia : 2.467 kg/m 25mm dia : 3.855 kg/m These are standard unit weights based on the density of steel @ 7850 kg/m3