It's exactly 60 pounds for every square inch it's applied to.
60 newtons is a unit of force in the International System of Units (SI) equivalent to approximately 13.48 pounds-force. It is commonly used to measure the force applied to an object.
The upward force required on push rod X to open the valve would also be 60 lbs, as it must be equal to the force needed to open the valve. Push rod X needs to counteract the same amount of force applied on the valve for it to open.
400 J
The work done by the woman is equal to the force applied multiplied by the distance moved in the direction of the force. In this case, the force is the weight of the child (60 N) and the distance moved vertically is 1 meter. The work done is 60 N * 1 m = 60 Joules.
The force needed to accelerate the 60 kg object at 10 m/s^2 is 600 N. This is calculated using Newton's second law: force = mass x acceleration.
To convert psi (pounds per square inch) to pounds (lbs), you need to know the area over which the pressure is applied. Pressure is defined as force (in pounds) divided by area (in square inches). Therefore, 60 psi can represent different weights depending on the area; for example, if the area is 1 square inch, then 60 psi equals 60 lbs. For other areas, the weight would be calculated by multiplying 60 psi by the number of square inches in that area.
104' minimum for 45 psi. 138' for 60 psi.
60-120 psi dont be fooled
Anywhere from 20 to 60 psi
60 newtons is a unit of force in the International System of Units (SI) equivalent to approximately 13.48 pounds-force. It is commonly used to measure the force applied to an object.
60 psi is about 413.7 kPa
The upward force required on push rod X to open the valve would also be 60 lbs, as it must be equal to the force needed to open the valve. Push rod X needs to counteract the same amount of force applied on the valve for it to open.
60 to 66 psi for the 4.3L. 41 to 47 psi for the 2.2L.
A lot
about 50-60 psi for uphill riding
400 J
60 to 66 psi