38 lbs
The Specific gravity of Walnut is .64 so it would weigh about 40 pounds per cubic foot, depending on the moisture content. Therefore a board foot would weigh between 3.3 & 3.5 pounds.
12x12 timber, of what wood species? And what is the moisture content of this wood? The question above cannot be answered without more information. A 12"x12"x8' piece of Balsa timber will weigh much less than a 12"x12"x8' Teak or Red Oak. In order to calculate the weight of 12x12 timber, you would need to know the specific weight of the wood, usually based on a board foot weight, then you could calculate how many board feet are in the piece of 12x12 you want to weigh. To get the board foot amount you would use this formula Thickness"*Width"*Length'/12 = Board Foot. So my piece listed above would be 96 board feet. Now that you know how much wood you want the weight of, you need to determine the moisture content, and also the wood species.
10
it depends how big the foot is.
4000 pounds for 10'
120 lb
The cost of plywood is determined by "board feet," that is one board foot of plywood is one cubic foot. The variety of the wood, the number of plys or layers, the grade of wood, and the type of glue used are all determinant factors in the cost.So, to determine the cost of one gram, you would need to weigh one board foot of the variety you choose. Determine the quantity that would weigh one gram, and divide the cost of one board foot by the number of grams in that board foot.
16 pounds
How much would it cost to give you spelling lessons
2x4's weigh approximately 1.21 pounds per foot. So an 8 Foot 2x4 = 9.68 pounds 12 Foot 2x4 = 14.52 pounds 14 Foot 2x4 = 16.94 pounds Just take 1.21 pounds times the length of the board and this will give it it's overall weight. This is for pine boards.
On average, Brazilian Walnut flooring costs about $8.97 per square foot. You can purchase this type of hardwood flooring from sites such as Amazon and Country Plank.
There are several factors to consider in the correct answer of your question, wet or dry weight can alter the exactitude of the aforementioned, but you can start at 3.4 pounds per board foot for Red Maple, wet it will weigh more than when its dry.
The board-foot is a specialized unit of volume for measuring lumber in the United States and Canada. It is the volume of a one foot length of a board one foot wide and one inch thick.
A board foot is 12 inches by 12 inches, 1 inch thick. Any combination of measurements that equal this is 1 board. 6x24x1 is 1 board foot. 2.9 board foot could be anything. There should be another measurement saying what this is. Board foot is used to figure cost as most common wood is the same price per board foot. Could be 2x4, 2x12 or 1 inch, it all works out the roughly the same price.
Not enough information. You would also need to know:* The thickness of the board * The density of the material. Many types of wood have a density that is slightly less than that of water.
Assumption: 6 x 6 is using inches as the unit (half a foot) and a 4 foot board means 4 square feet of board. Each square foot of board can be cut into four half foot x half foot pieces. Therefore, the 4 foot board would be able to make 16 half foot x half foot (6 inch x 6 inch) blocks.
A foot.
A board foot is 12 inches by 12 inches by 1 inch thick. A board 6 inches wide, 24 inches long and 1 inch thick is still 1 board foot. Any combination of the three measurements that add up to the first, 12x12x1 is considered 1 board foot.