0
What else can I help you with?
The width of your little finger?
foot
30 centimeters equals?
30 centimeters equals approximately 1 foot. 30.48 centimeters equal exactly 1 foot. 1 foot .984942 feet 11.81102 inches 0.328083 yards .3 meters .03 dekameter .003 hectometers 300 millimeters 0.0003 kilometers
How many kw to heat 1000 square foot?
The amount of kilowatts (kW) needed to heat a 1,000 square foot space depends on several factors, including insulation, ceiling height, climate, and the specific heating system used. Generally, a rough estimate is about 30-60 BTUs per square foot. This translates to approximately 10-20 kW for a 1,000 square foot area, depending on efficiency and specific conditions. It's best to consult a heating professional for a tailored assessment.
Callculating rise and run when laying pipe?
!/8 in of rise to 1 foot of run.
How many 6.5x6.5 tiles would you need for 36 square foot room?
123 tiles
What is the weight of Red Maple per board foot?
There are several factors to consider in the correct answer of your question, wet or dry weight can alter the exactitude of the aforementioned, but you can start at 3.4 pounds per board foot for Red Maple, wet it will weigh more than when its dry.
How many M's of hardwood lumber will fit into 40' container?
A standard 40-foot shipping container has a volume of approximately 2,390 cubic feet. Hardwood lumber typically has a density of about 4-5 pounds per board foot, and one cubic foot equals 12 board feet. Considering the space required for packaging and handling, you can typically fit around 20-25 cubic meters (M's) of hardwood lumber into a 40-foot container, depending on the size and arrangement of the lumber.
Can a 7ply maple and bamboo long board hold a 5 foot 4 140 lbs person?
very easily
Who much money is one gram of plywood?
The cost of plywood is determined by "board feet," that is one board foot of plywood is one cubic foot. The variety of the wood, the number of plys or layers, the grade of wood, and the type of glue used are all determinant factors in the cost.So, to determine the cost of one gram, you would need to weigh one board foot of the variety you choose. Determine the quantity that would weigh one gram, and divide the cost of one board foot by the number of grams in that board foot.
How much does a 2in by 6in eight foot long pine board weigh?
16 pounds
How much does Bruce Hardwood charge for a square foot of floor?
In 2010, the average price for a square foot of Bruce Hardwood flooring was $8 per square foot. Bruce Hardwood is based in Lancaster, Pennsylvania, USA.
How much does black walnut weigh per board foot?
38 lbs The Specific gravity of Walnut is .64 so it would weigh about 40 pounds per cubic foot, depending on the moisture content. Therefore a board foot would weigh between 3.3 & 3.5 pounds.
How much does 1 board foot of white pine weigh?
On average, 1 board foot of white pine weighs around 2.5 to 3 pounds. The weight can vary depending on the moisture content and specific gravity of the wood.
How much does box hardwood flooring weigh?
On average, box hardwood flooring weighs around 2.5 to 3 pounds per square foot. However, the weight can vary depending on the thickness and width of the planks. It's best to check with the manufacturer for specific weight information.
What is the Weight per square foot of hard maple flooring?
Maple wood weighs aprroximately 48 lb / cubic foot and so the flooring should weigh about 3 lb / sq. ft. depending on the thickness of the flooring (3lb would be average for 3/4 inch thick flooring). Ray
How much does a 2X4 weigh per foot?
2x4's weigh approximately 1.21 pounds per foot. So an 8 Foot 2x4 = 9.68 pounds 12 Foot 2x4 = 14.52 pounds 14 Foot 2x4 = 16.94 pounds Just take 1.21 pounds times the length of the board and this will give it it's overall weight. This is for pine boards.
What does one square foot of hardwood flooring weigh?
The weight of an actual wood flooring will depend on the wood specie being installed. A loose grain wood will be lighter in weight than a tight grain. Most exotic hardwood floorings, such as Brazillian Cherry and Ipe are heavier in weight, compared to flooring harvest in the North American regions like Oak and Maple Flooring.
