-- Apply a small, known voltage between the terminals of the device.
-- Measure the current through the device with the voltage applied.
-- Calculate the resistance of the device. It's (voltage) divided by (current).
To find resistance from a graph of voltage vs. current, you can calculate the slope of the graph. Resistance is equal to the slope, so you can divide the voltage by the current to determine the resistance. The unit of resistance is ohms (Ω).
To find out which wire has the greatest resistance, you will need to measure the resistance of each wire using a multimeter. Connect the multimeter to each wire separately and record the resistance values displayed. The wire with the highest resistance value will have the greatest resistance.
That entirely depends on whether the resistances are in series or in parallel with each other. Ohm's law states that I=V/R. i.e. current = voltage/resistance. If you know the current and voltage you can find the resistance. You can use algebra to rearrange the formula for R and get that R= V/I. Resistance = voltage/current.
The formula to find resistance force is given by R = F/A, where R is the resistance force, F is the force applied, and A is the area over which the force is applied. This formula is often used in physics and engineering to determine the resistance force in various scenarios.
To find the net resistance of the circuit connected to the battery in the figure, you need to calculate the total resistance by adding up the individual resistances in the circuit.
To find resistance from a graph of voltage vs. current, you can calculate the slope of the graph. Resistance is equal to the slope, so you can divide the voltage by the current to determine the resistance. The unit of resistance is ohms (Ω).
To find out which wire has the greatest resistance, you will need to measure the resistance of each wire using a multimeter. Connect the multimeter to each wire separately and record the resistance values displayed. The wire with the highest resistance value will have the greatest resistance.
By Ohm's Law, resistance is voltage divided by current.
The test equipment needs two test leads to find the resistance in a circuit.
i think first one should find out the series resistance that is R1+R2+R3 and after that parellel resistance that is 1/R1+1/R2+1/R3 and after that add the series resistance and parellel resistance to get the total resistance
when the lengh of the conductor is increased by 25%. find the increase in its resistance
Current= Volage/Resistance
ghandi's entire ethos was about passive resistance
yes.it is used to find self-inductance and internal resistance
You can find a quality resistance band workout posted on YouTube and also on some fitness blogs. The 10 minute trainer also has great resistance band workout.
That entirely depends on whether the resistances are in series or in parallel with each other. Ohm's law states that I=V/R. i.e. current = voltage/resistance. If you know the current and voltage you can find the resistance. You can use algebra to rearrange the formula for R and get that R= V/I. Resistance = voltage/current.
Resistance is measured in Ohms with an ohmeter.