The formula for kinetic energy is KE = 0.5 * mass * velocity^2. Plugging in the given values, the kinetic energy of the 1600 kg car traveling at 12.5 m/s would be:
KE = 0.5 * 1600 kg * (12.5 m/s)^2 = 125,000 Joules.
The kinetic energy of the car can be calculated using the formula: KE = 0.5 * m * v^2, where m is the mass of the car (1600 kg) and v is the speed (12.5 m/s). Plugging in these values, the kinetic energy of the car is: KE = 0.5 * 1600 kg * (12.5 m/s)^2 = 125000 J.
The kinetic energy of the car is calculated using the formula KE = 0.5 * m * v^2, where m is the mass of the car and v is its velocity. Plugging in the values, KE = 0.5 * 1600 kg * (12.5 m/s)^2 = 125,000 J. Therefore, the kinetic energy of the car is 125,000 Joules.
You need to divide the kinetic energy by the energy used (i.e., by the chemical energy), and convert that into a percentage.Note that in practice, normally you would use units of power (such as watts, equal to joules/second) rather than energy (such as joules).
The relation between kinetic energy is proportional to the square of velocity. Momentum is directly proportional to velocity. If the momentum of an object is doubled, but its mass does not increase (so velocity remains well below the speed of light), then its velocity is doubled. If the velocity is doubled then the kinetic energy increases by the square of 2, or four time.
The elevators in the Willis Tower (formerly Sears Tower) have a speed of around 1,600 feet per minute, which is equivalent to about 18 miles per hour.
The kinetic energy of the car can be calculated using the formula: KE = 0.5 * m * v^2, where m is the mass of the car (1600 kg) and v is the speed (12.5 m/s). Plugging in these values, the kinetic energy of the car is: KE = 0.5 * 1600 kg * (12.5 m/s)^2 = 125000 J.
The kinetic energy of the car is calculated using the formula KE = 0.5 * m * v^2, where m is the mass of the car and v is its velocity. Plugging in the values, KE = 0.5 * 1600 kg * (12.5 m/s)^2 = 125,000 J. Therefore, the kinetic energy of the car is 125,000 Joules.
KE = 1/2 M V2= (1/2) (1,600) (12.5)2= 125,000 kg-m2/sec2= 125,000 newton-meters= 125,000 joules.
KE = 1/2 M V2= (1/2) (1,600) (12.5)2= 125,000 kg-m2/sec2= 125,000 newton-meters= 125,000 joules.
You need to divide the kinetic energy by the energy used (i.e., by the chemical energy), and convert that into a percentage.Note that in practice, normally you would use units of power (such as watts, equal to joules/second) rather than energy (such as joules).
A nautical mile represents one minute of arc of latitude and is 1852m. 1600 km is 1,600,000 m 1600000/1852 = 864 minutes 864 minutes is 14.4 degrees 14.4 degrees is 14.4 x 24/360 = 0.96 hours.
The relation between kinetic energy is proportional to the square of velocity. Momentum is directly proportional to velocity. If the momentum of an object is doubled, but its mass does not increase (so velocity remains well below the speed of light), then its velocity is doubled. If the velocity is doubled then the kinetic energy increases by the square of 2, or four time.
The maximum speed of the 1962 Porsche 1600 s 4cyl 90hp is 100 mph.
The PC speed rating that matches up with DDR3-1600 RAM is PC3-12800. This designation indicates that the RAM operates at a maximum bandwidth of 12,800 MB/s. The "1600" in DDR3-1600 refers to the memory clock speed of 1600 MHz, which is consistent with the PC3-12800 rating.
The maximum speed of the Porsche 1600 s 4cyl 75hp 1962 is 175 km/h .
1500 rpm.
The power of the engine and the maximum speed of the 1978 Honda Accord 1600 are 84 bhp and 60 mph respectively.