0
What else can I help you with?
Does steel have a low thermal conductivity?
It depends on what you compare it to. Steel has a thermal conductivity about 100 times greater than insulation, but is less conductive than materials such as ceramic or copper.
How much does a 12X12X1 piece of mild steel weigh?
A 12x12x1 piece of mild steel weighs approximately 40.8 pounds.
Is slate a insulater?
Yes, slate can be an insulator. Since slate is chiefly carbon based, and many forms of carbon act as a mild insulator, slate could have this property as well. Unfortunately, slate can also contain contaminants that might act as a conductor.
What is the weight per square meter of 2mm thick HRCA mild steel sheet?
The weight of mild steel can vary slightly depending on the exact composition, but as a general rule of thumb, the weight of a 2mm thick hot rolled commercial quality mild steel sheet is approximately 15.7 kilograms per square meter.
What is the weight per meter of 140x140x12.5 shs mild steel?
To calculate the weight per meter of a 140x140x12.5 SHS (Square Hollow Section) mild steel, you would need to first calculate the cross-sectional area (A) of the SHS using the dimensions provided. Then, you can multiply the cross-sectional area by the density of mild steel (7,850 kg/m^3) to get the weight per meter.
Does steel have a low thermal conductivity?
It depends on what you compare it to. Steel has a thermal conductivity about 100 times greater than insulation, but is less conductive than materials such as ceramic or copper.
Mild steel heat treatable or not?
yes
Which metal can be preferred as heat resistance mild steel or stainless steel 304?
s.s 304 is the best material for heat resistance i.e its has good properties axydisation , not acidic reactive
Does Mild steel have good compression?
No, it is good in tension.
Which is heavier stainless steel or mild steel?
mild steel is heavier
Specific heat for alluminium and mild steel?
The specific heat of aluminum is approximately 0.897 J/g°C and the specific heat of mild steel is approximately 0.450 J/g°C. This means that aluminum requires more energy to raise its temperature than mild steel for a given mass.
Which is more hard lead or mild steel?
Mild steel
What is the copper percent in mild steel?
Mild steel, not copper.
Is mild steel inlcudes stainless steel?
No, mild steel is low carbon steel with no other alloys.
Is A36 steel mild steel?
Yes. It is considered "Mild" Steel due to the low amount of carbon in the steel.
What are the aesthetics of mild steel?
Mild Steel aesthetics could be sh
What is heat transfer coefficient of mild steel and stainless steel?
About 8W/m2K for MS Steel against air convection
