A cylinder filled with water has properties such as volume, surface area, and weight. The volume of water in the cylinder is determined by its height and radius. The surface area of the cylinder is the total area of its curved surface and two circular bases. The weight of the water in the cylinder is influenced by its volume and density.
An empty cylinder weighs less because it contains only the weight of the cylinder itself, whereas a filled cylinder contains the weight of both the cylinder and the substance inside it. The substance inside adds to the total weight of the filled cylinder.
The number of balloons that can be filled from one cylinder depends on the size of the cylinder and the size of the balloons. Typically, a small cylinder can fill around 30-50 balloons, while a larger cylinder can fill over 100 balloons.
displacement - invented by Archimedes. Completely fill a large volume of something with water. Have a spout to channel all excess water. Place a graduated cylinder under the spout. Place irregular object in the large volume filled with water. The volume of the irregular object will displace an equivalent volume of water into the graduated cylinder. The measured volume in the cylinder is the volume of the irregular object.
A hollow cylinder has a volume that is the difference between the volume of the outer cylinder and the inner cylinder. The surface area of a hollow cylinder is the sum of the surface areas of the outer and inner cylinders, plus the surface area of the two circular ends. The presence of the keyword "j" does not directly relate to the properties of a hollow cylinder.
A tank filled with water is a better conductor than a winter jacket because water contains free ions that can carry electric current more easily compared to the insulating properties of the materials in the jacket. The molecules in the jacket are arranged in a way that does not allow electric current to flow easily through them.
Depends on the weight of the glass. The water weighs 10 grams if filled to the 10 ml mark - more if overfilled, of course.
Gases that are relatively insoluble in water are collected by water displacement. The gas pushes the water down and out of the water-filled gas-collecting vessel. The gas-collecting vessel (generally a flask or test tube) is first filled with water, covered with a glass plate or plastic wrap (no air bubbles must enter the vessel, and then inverted into a deep pan or tray half-filled with water. The glass plate or plastic wrap is removed, and the tubing from the gas generator is inserted into the mouth of the gas-collecting vessel.
The air (within the ship) is less dense than water.,
Two properties of a cylinder are that they are both curved and have 3 dimensions. Two properties of a cylinder are that it is rounded and it is three dimensional.
It could sink. (The metal's density is greater than water.) It could turn into a ball of flames. (If you dropped a chunk of sodium into graduated cylinder, it would react with flames or sparks.)
To find the volume of an irregular object such as a rock, you have to use displacement. If you place the object in a graduated cylinder filled with water, the volume of the object is equal to the amount of water that the object displaces. For example, if a graduated cylinder is filled with 100mL of water, and you place an object such as a rock and the water rises from 100mL to 106mL, then the volume of the rock is 6.
The gas in the liquified state under pressure and it can be filled inside the cylinder. Then it takes the entire available place in side the cylinder. This way gas filled in side the cylinder.
An empty cylinder weighs less because it contains only the weight of the cylinder itself, whereas a filled cylinder contains the weight of both the cylinder and the substance inside it. The substance inside adds to the total weight of the filled cylinder.
The gas is liquified under pressure and it it takes the entire avalaible place inside the cylinder. thus gas is filled in a cylinder
after 5.63 gm sample of wood metal was added in a 10ml graduated cylinder the new water level is 8.7ml "http://wiki.answers.com/Q/Was_the_water_in_a_cylinder_before_the_sample_was_added" after 5.63 gm sample of wood metal was added in a 10ml graduated cylinder the new water level is 8.7ml "http://wiki.answers.com/Q/Was_the_water_in_a_cylinder_before_the_sample_was_added"
A full cylinder is heavier than empty. The cylinder is filled by weight.
Fresh water filled.