answersLogoWhite

0

The purpose of the corona wire on a drum is to create a static charge on the surface of the drum. This charge helps attract toner particles to the drum, allowing for the transfer of the toner onto the paper during the printing process. In essence, the corona wire helps facilitate the printing process by ensuring that the toner adheres properly to the drum and is transferred accurately onto the paper.

User Avatar

AnswerBot

3mo ago

What else can I help you with?

Continue Learning about Physics

What does the primary corona wire charge in a printer?

The primary corona wire in a printer charges the drum or imaging unit, which helps to attract and transfer toner onto the paper during the printing process.


How many volts of electricity is emitted from the primary corona wire to place the charge on the drum during the conditioning phase?

The voltage applied to the corona wire in a xerographic copier or printer varies depending on the manufacturer and model, however, it is a high voltage. On the other hand, that voltage is applied but is not emitted. It is a static electrical voltage and does not go anywhere (there is no effective current)


Is not necessarily a reason to machine a Brake Drum A. Taper B. Minor Scoring C. Out-of-Roundness D. Pulsation?

B. Minor scoring. Machining a brake drum may not be necessary if there is only minor scoring present. Taper, out-of-roundness, and pulsation are all reasons to consider machining a brake drum to restore its smooth surface and proper functionality.


Parts of a photocopier?

Some common parts of a photocopier include the document feeder, platen glass, toner cartridge, drum unit, fuser unit, and control panel. These parts work together to scan, process, and reproduce documents.


Which flash is used in a Xerox machine to spread the charge?

In a copier or printer manufactured by the Xerox Corporation, the charge is placed on the photoreceptor by passing it under a charged wire. No flash is used for that purpose. Some copiers do use a flash lamp to illuminate the document to be copied, but that is quite a different thing from "spreading the charge."

Related Questions

What is the main purpose of a laser printer charge corona?

When an electrical charge is placed on the drum repels the toner particles that have the same charge. The laser then discharges the drum in specific places, causing toner to stick just to the discharged places on the drum. The toner is then transferred to the paper and the paper is heated to fuse the toner to the paper.


What are the functions of the two corona wires in a laser printers?

They transfer toner from the drum to the paper.


What is the purpose of a drum brake?

The purpose of a drum brake is to come to a complete stop with any veichle that may have drum brakes in the rear of the car.


What is the purpose of the dryer felt seal and how does it contribute to the efficient operation of the appliance?

The purpose of the dryer felt seal is to create a seal between the drum and the front or rear of the dryer. This seal helps prevent hot air from escaping, which improves the efficiency of the dryer by maintaining the proper temperature inside the drum.


What does the primary corona wire charge in a printer?

The primary corona wire in a printer charges the drum or imaging unit, which helps to attract and transfer toner onto the paper during the printing process.


What is the purpose of the kick drum resonant head and how does it affect the sound of the drum?

The purpose of the kick drum resonant head is to control the sustain and tone of the drum. It affects the sound by influencing the amount of air that can escape from the drum, which in turn impacts the depth and pitch of the sound produced.


What is the purpose of boiler drum?

Purpose of the boiler drum is to collect steam from all the various tubes in a boiler, and send it to the turbine to spin the generator


What are the six steps of the laser printing?

1.Cleaning – Excess Toner is Scraped From The Photoelectric Drum. 2.Conditioning – A Uniform -600 Volt Charge is Placed on the Photoelectric Drum By The Primary Corona. 3.Writing – Laser Diodes Write An Invisible Electric Image on the photoelectric drum by causing the Drum surface, to be less negative wherever the laser beam hits. 4.Developing – This is where the transfer roller places the toner on the drum. The toner sticks to the areas that have had the electric charge lessened due to the laser beam 5.Transfer – The Secondary corona uses a positive charge to attract the toner from the drum to the paper. The paper gets charged by corona too. 6.Fusing – The toner is then melted into paper.


What does a drum kit consist of and how does each component contribute to the overall sound and functionality of the instrument?

A drum kit typically consists of drums, cymbals, and hardware like stands and pedals. Each component contributes to the overall sound and functionality of the instrument. The drums provide different tones and rhythms, the cymbals add accents and dynamics, and the hardware allows the drummer to play and control the kit effectively. Together, these components create a versatile and expressive instrument for creating music.


What can you do to temporarily solve streaking or fight printing on a laser printer?

Clean the corona wire and wipe the drum with a soft cloth.


Which component normally included in a laser printer's toner cartridge?

Photo Sensitive Drum, cleaning blade, and primary corona wire


Is the war drum the best motivational tool ever?

No. The purpose of the drum was to give orders to the troops and not to motivate.