whose resistance=0,inductance=0
When a capacitor is connected to a circuit, the current flow through the capacitor initially increases and then decreases as the capacitor charges up.
A capacitor can be charged using a battery by connecting the positive terminal of the battery to one terminal of the capacitor and the negative terminal of the battery to the other terminal of the capacitor. This creates a flow of electrons from the battery to the capacitor, storing electrical energy in the capacitor.
The formula for calculating the charge stored in a capacitor is Q CV, where Q represents the charge stored in the capacitor, C is the capacitance of the capacitor, and V is the voltage across the capacitor.
The two factors that determine the capacitive reactance of a capacitor are the frequency of the AC voltage applied to the capacitor and the capacitance value of the capacitor. At higher frequencies and with larger capacitance values, the capacitive reactance decreases.
A capacitor discharges when it releases the stored electrical energy it has accumulated. This typically happens when the capacitor is connected to a circuit or load that allows the energy to flow out of the capacitor.
in output is pulsetting voltage remove the pulses to use the capacitor this passes the pure voltage to the load
It filters ac to pure dc
Angle between v and i is 90 deg so, cos 90 = 0 Same for pure capacitor
pi filter is best using inductor and capacitor.
The circuit becomes a pure resistance circuit where current and voltage are in phase with each others.
You can't convert ac to pure dc with diode only. The easiest way to convert ac to dc by with diode is by using rectification, it consist of at least 2 diodes (half wave rectifier) and (capacitor is to "smoother" the wave).
when the DC current flows through the capacitor .the leakage of the charges is in capacitor called Dc leakage capacitor .
You can not by-pass the capacitor in an electric motor. Most are capacitor-start motors which require the capacitor to be operational in order to start. If the capacitor is not working then it will need to be replaced.
When a capacitor is connected to a circuit, the current flow through the capacitor initially increases and then decreases as the capacitor charges up.
GANG capacitor is called so because it group of capacitor
A capacitor can be charged using a battery by connecting the positive terminal of the battery to one terminal of the capacitor and the negative terminal of the battery to the other terminal of the capacitor. This creates a flow of electrons from the battery to the capacitor, storing electrical energy in the capacitor.
The formula for calculating the charge stored in a capacitor is Q CV, where Q represents the charge stored in the capacitor, C is the capacitance of the capacitor, and V is the voltage across the capacitor.