Ton Of Refrigeration : Is the refrigerating effect required to reduce the temperature of one ton of water from zero degree Celsius (liquid stage) to zero degree Celsius (solid stage) in 24 hour.
Kiran.
There are 12,000 British Thermal Units (BTU) in a ton of refrigeration (1 ton of refrigeration = 12,000 BTU/h). This measure is commonly used in the refrigeration industry to quantify the cooling capacity of a system.
A ton of dollars would equal $2,000,000. This is based on the standard definition of a ton, which is equivalent to 2,000 pounds, and each pound in this context representing one dollar.
In a refrigeration system, 1 ton of cooling capacity is equal to 3-4 gallons per minute (GPM) of water flow rate for the evaporator coil. This value may vary depending on the specific system design and operating conditions.
To convert refrigeration tons (RT) to kilowatt-hours (kWh), you need to know the efficiency of the refrigeration system. Multiply the RT by 12,000 (which is the number of BTUs per hour in one refrigeration ton) to get the BTUs per hour. Then, divide the BTUs per hour by the system's efficiency to get the kWh required.
A gram weighs 907 184.74th of a ton.
One ton of cooling is about 12,000 Btu/h one Btu/h is 0.293 watt so...One ton = 3.516 Kilowatts
One ton of cooling is about 12,000 Btu/h one Btu/h is 0.293 watt so...One ton = 3.516 Kilowatts
1 ton Refrigeration = 3026 kCal / hr
In Indian context how much kW equals to one ton (refrigeration)
Tonne of refrigeration(TR) is the practical unit of refrigeration effect.Tonne of refrigeration(TR) is defined
Ton of refrigeration
1 ton = 12000 BTUs
There are 12,000 British Thermal Units (BTU) in a ton of refrigeration (1 ton of refrigeration = 12,000 BTU/h). This measure is commonly used in the refrigeration industry to quantify the cooling capacity of a system.
A Ton is the measurement of the amount of heat required to melt one ton of ice. It is also 12,000 BTU (British Thermal Unit) So the Ton is a measurement of the amount of heat that the refrigeration system can remove.
When talking about refrigeration, a ton is a unit of power. To quote wikipedia:"In North America, a standard ton of refrigeration is 12,000 BTU/h = 200 BTU/min ≈ 3,517 W. This is approximately the power required to melt one short ton (2,000 lb) of ice at 0 °C in 24 hours, thus representing the delivery of 1 ton of ice per day." (http://en.wikipedia.org/wiki/Ton)
1 ton refrigerant= 3.5 kW
The original definition of a "ton" of cooling capacity (heat flow) was the heat to melt one ton of ice every 24 hours. In North America, a "standard ton of refrigeration" is 12,000 BTU/h because that corresponds to the heat of fusion for water at 32 °F divided by 1 day.