In short least count is the least possible measurement that could be done using that device.
In screw type least count is got by the formula pitch/number of head scale divisions
And pitch is nothing but the distance moved as we give one complete rotation. So if 1mm is moved for one rotation the pitch is 1mm. If we have 100 equal divisions marked on the head scale then least count would come as 1/100 = 0.01 mm
So we can measure the diameter of spherical bulrush so accurate as 3.24 mm or 2.53 mm
Correct to two decimal places. We cannot get the accuracy as 3.534 etc.
The differential equation governing the behavior of an LC circuit is: d2q/dt2 (1/LC)q 0.
The equation used to calculate the resonant frequency of an LC circuit is: f 1 / (2(LC)), where f is the resonant frequency, L is the inductance of the circuit, and C is the capacitance of the circuit.
Self-tuning feedback
You can create an oscillator without using LC components by using an operational amplifier (op-amp) configured as an astable multivibrator. The op-amp can generate a square wave output using resistors and capacitors to create the necessary feedback loop for oscillation. This circuit can provide a stable frequency output without the need for inductors or capacitors.
The essential components of a feedback LC oscillator include an inductor (L) and a capacitor (C) connected in a feedback loop, a gain element such as a transistor or amplifier to compensate for energy losses, and a feedback network to sustain oscillations by providing positive feedback. The LC tank circuit stores and exchanges energy between the inductor and capacitor to generate an oscillating signal at the resonant frequency of the tank circuit.
LC FOR VERNIER CALIPER-0.1mm LC FOR MICROMETER -0.01 mm L.C- NO OF SMALLEST DIVISION ON MAIN SCALE ------------------------------------------------------- TOTAL NO OF DIVISION ON VERNIER SCALE
LC FOR VERNIER CALIPER-0.1mm LC FOR MICROMETER -0.01 mm L.C- NO OF SMALLEST DIVISION ON MAIN SCALE ------------------------------------------------------- TOTAL NO OF DIVISION ON VERNIER SCALE
LC FOR VERNIER CALIPER-0.1mm LC FOR MICROMETER -0.01 mm L.C- NO OF SMALLEST DIVISION ON MAIN SCALE ------------------------------------------------------- TOTAL NO OF DIVISION ON VERNIER SCALE
riva
double barrel
its a 1910 16 gauge not a 12
On the left side of the carb you will see a screw with a spring on it, turn this clockwise to lower tickover and anti clockwise to raise tickover.
I paid $700.00 for a decent field grade 16 ga LC Smith.
Stick the tank like in a gas station. lc
If you can send photos or tell me the ser# i can tell you the amount. Boocoo
That all depends on the shotguns overall condition,and bore condition also.
It should be marked on the barrels near the breach.