answersLogoWhite

0

One full revolution of the thimble on a micrometer typically equals the pitch of the thread on the spindle, which is usually 0.5 mm. This means that each full rotation of the thimble will advance the spindle by 0.5 mm.

User Avatar

AnswerBot

1y ago

What else can I help you with?

Continue Learning about Physics

What is one complete revolution of a micrometer screw equal to?

One complete revolution of a micrometer screw is equal to a pitch of the screw, which is typically 0.5 mm. This means that moving the thimble one full revolution will advance or retract the spindle by 0.5 mm.


What is the total movement indicated on the thimble if it has been rotated one revolution on a micrometer from zero?

It depends on the screw thread pitch (or "lead") in the heart of the micrometer. Typically, screw pitches in common hand-held micrometers are 40 per inch in an Imperial micrometer or 2 per millimetre in a Metric micrometer. Thus, one full turn of the thimble of an Imperial micrometer is 1/40th of an inch (25 thousandths of an inch or "25 thou") and similarly, one full turn of the thimble of a Metric micrometer is 1/2 a millimetre (500 micrometres).


What is larger nanometer or micrometer?

One micrometer is larger than one nanometer. One micrometer is equal to 1000 nanometers.


What is bigger a meter or a micrometer?

A meter is bigger than a micrometer. One meter is equal to 1,000,000 micrometers.


How do you read micrometers?

Difficult to explain without diagrams, but the micrometer relies on an accurate screw which advances the caliper a precise amount with each revolution. So you turn the screw until the object is lightly held, then read the axial scale and add on for the number of screw turns above the nearest scale reading. The most accurate type also have a vernier scale for very small distances. I suggest you look at Wikipedia 'Micrometer' which has a thorough explanation with diagrams.

Related Questions

What is one complete revolution of a micrometer screw equal to?

One complete revolution of a micrometer screw is equal to a pitch of the screw, which is typically 0.5 mm. This means that moving the thimble one full revolution will advance or retract the spindle by 0.5 mm.


What is the total movement indicated on the thimble if it has been rotated one revolution on a micrometer from zero?

It depends on the screw thread pitch (or "lead") in the heart of the micrometer. Typically, screw pitches in common hand-held micrometers are 40 per inch in an Imperial micrometer or 2 per millimetre in a Metric micrometer. Thus, one full turn of the thimble of an Imperial micrometer is 1/40th of an inch (25 thousandths of an inch or "25 thou") and similarly, one full turn of the thimble of a Metric micrometer is 1/2 a millimetre (500 micrometres).


On a zero to one inch micrometer one complete revolution of the thimble is equal to?

On a zero to one inch micrometer, one complete revolution of the thimble typically equals 0.025 inches (or 25 thousandths of an inch). This is because the thimble is usually calibrated with 40 divisions, and each division represents 0.001 inches. Therefore, one full turn (40 divisions) results in a total increment of 0.025 inches.


How many turns of a metric micrometer thimble are needed to move it one millimeter?

2


What is the total movement indicated on the thimble if it has been rotated one revolution?

The total movement on the thimble if it has been rotated one full revolution would be the pitch of the screw multiplied by the number of thread on the spindle.


How you calculate the least count of English micrometer?

The least count of an English micrometer can be calculated by dividing the value of one full rotation of the thimble by the number of divisions on the thimble. Typically, one full rotation corresponds to 1 millimeter (mm) or 0.1 cm, and if the thimble has 100 divisions, the least count would be 1 mm / 100 = 0.01 mm or 10 micrometers. Thus, the least count indicates the smallest measurement that can be accurately read on the micrometer.


What is larger nanometer or micrometer?

One micrometer is larger than one nanometer. One micrometer is equal to 1000 nanometers.


What is bigger a meter or a micrometer?

A meter is bigger than a micrometer. One meter is equal to 1,000,000 micrometers.


Is a micrometer larger or smaller than a meter?

Smaller a micrometer is 1/1,000,000 of a meter


How do you read micrometers?

Difficult to explain without diagrams, but the micrometer relies on an accurate screw which advances the caliper a precise amount with each revolution. So you turn the screw until the object is lightly held, then read the axial scale and add on for the number of screw turns above the nearest scale reading. The most accurate type also have a vernier scale for very small distances. I suggest you look at Wikipedia 'Micrometer' which has a thorough explanation with diagrams.


How many mm equal to one micrometer?

1 micrometer = 0.001 millimeters. Google can be used for unit conversions.


What is the smallest possible reading in mm on the thimble scale and what is the biggest reading?

The smallest possible reading on the thimble scale is typically 0.01 mm, which represents one division on the scale. The largest reading depends on the maximum range of the micrometer but can be in the range of several millimeters.