0
What else can I help you with?
What would happen if a glass plate is replaced by a plane mirror?
If a glass plate is replaced by a plane mirror, the mirror will reflect an image of the objects in front of it. The mirror will not refract light like the glass plate would, and the reflected image will appear to be at the same distance behind the mirror as the object is in front of it.
What happens if you replace glass plate with plane mirror in newton ring experiment?
If you replace the glass plate with a plane mirror in the Newton's rings experiment, interference fringes will not be observed. The formation of Newton's rings depends on the light reflecting off the two surfaces of the air film between the glass plate and the lens, creating interference patterns. However, the mirror does not create the necessary conditions for interference to occur.
What is the name of a smooth surface that reflects an image of what is in front of it?
The reflective surface is a mirror. It can be highly polished metal or chromed, the surface of a calm area of water, or a flat glass plate with a silvered back and a protective coating.
What is a mirror maker called?
A mirror maker is typically called a glassworker, mirror artisan, or mirror manufacturer.
What is a reflection in the mirror called?
A reflection in the mirror is called a mirror image. Mirror images are the virtual images that we see when looking at our reflection in a mirror.
What would happen if a glass plate is replaced by a plane mirror?
If a glass plate is replaced by a plane mirror, the mirror will reflect an image of the objects in front of it. The mirror will not refract light like the glass plate would, and the reflected image will appear to be at the same distance behind the mirror as the object is in front of it.
How do you remove the mirror from the power mirror inspect the motor inside?
Typically the mirror is clipped onto a flat plate behind it. Use a glass fixers sucker or a few small hooks around the edge and pull the mirror away from the plate.
How do you replace a driver side mirror on a 1993 Toyota Tercel?
There is a triangular plastic plate on the inside of the car door that covers up the mounting screws for the mirror. You need to get the plate off first. I did this on my '92 passenger side and was unable to get the plate off without breaking it). Once the plate is off there are 3 screws that hold the mirror to the door. Take them out, change mirror, put them back in.
How do you make toast in the sun?
first u have to put a toast on a plate, place the plate on a roof, get a mirror and make the mirror reflect to the sun to make the toast
Is a shiny metal plate also said to be mirror?
Yes, A shiny metal plate is also said to be a mirror because reflection occurs when light rays strike a shiny surface or a mirror. By: Aisha Ijaz
Is a shiny metal plate said to be a mirror?
yes or no
How can I tighten my loose electronic compass rear view mirror in a Ford Taurus?
there should be a screw on the mounting plate for your mirror. most of then are a hex head bolt the just holds the mirror to the mounting plate. look at where the mirror connects to the windshield, that's where the bolt should be.
How do mirror form an image?
A mirror is formed by a glass plate with a reflective coating behind it. A mirror reflects the right that hits it, thereby forming an image of what is in front of the mirror.
How do you install rear view mirror on a 2000 civic?
Get some rear view mirror glue from target and glue the plate to the window. Make sure the tapered edge tapers into the window. If you glue it on wrong you can always buy another plate and glue that to the first but you will feel pretty stupid. Then slide the mirror on the plate.
Where can you find a backing plate for the passenger side mirror on a 1998 Honda Accord?
You can find a backing plate for your 1998 Honda Accord passenger side mirror at most auto-parts stores. You can also find the backing plate at your local Honda dealership.
How do you install a separate glass mirror just a 12 dollar mirror for a 98 Ford Econoline side-view mirror Use glue?
If you still have the backing plate available you can use it RTV silicone adhesive to mount the glass to the backing plate. If you have not yet purchased the mirror glass we do have them available for $19.99 shipped and they include adhesive mounting tabs designed specifically for mounting glass to the backing plate. Thanks Jack
How do you remove a mirror from a 1990 Ford Ranger when screws are stripped?
drill screw head out with 1/4 " drillbit mirror mounting plate can be removed by removing door panel. replace with new monting plate if threads are stripped in mounting plate. just did this myself
