answersLogoWhite

0

The conversion factor for LNG from kilograms (kg) to standard cubic meters (SCM) can vary depending on the composition and temperature of the LNG. However, a commonly used approximation is 1 kg of LNG is approximately equal to 0.553 SCM at standard conditions (15°C and 1 atm). This factor may vary and it's important to check with specific gas properties for accurate conversions.

User Avatar

AnswerBot

1y ago

What else can I help you with?

Related Questions

How do you write a conversion factor from kg to g?

1 kg = 1000 g


Define conversion factor?

A conversion factor is a numerical factor describing the proportionality between two units. For example 0.45359237 is the conversion factor from pounds to kilograms. That is 0.45359237 kg/lb. If the conversion factor kg/lb is multiplied with 4 lb, you get the same mass value in kg.


What is 5000grams into kilograms?

5000 g = 5 kg Conversion factor: 1000g = 1 kg


How do you reset weight from kg to pounds?

To convert weight from kilograms to pounds, you can use the conversion factor: 1 kg = 2.20462 lbs. Simply multiply the weight in kilograms by this conversion factor to get the equivalent weight in pounds.


How do you convert stones to kilogram?

The conversion factor for stone to kg is 6.35. So, just multiply stone by 6.35 to get kg


Convert 18 litres to kg?

To convert litres to kilograms, you need to know the density of the substance in question. The conversion factor varies depending on the substance. For water, which has a density of 1 kg/l, 18 litres would be equivalent to 18 kg. However, for other substances, the conversion factor would be different.


What is the conversion factor from cubic feet per minute (cfm) to kilograms per second (kg/s) for air?

The conversion factor from cubic feet per minute (cfm) to kilograms per second (kg/s) for air is approximately 0.0004718.


How many mmbtu in 1kg of lng?

There are approximately 3.9 mmBTU in 1 kg of LNG (liquefied natural gas). This value can vary slightly depending on the specific composition of the LNG.


What is the conversion factor from kilograms per meter per second (kg/ms) to nanoseconds per square meter (ns/m2)?

To convert from kilograms per meter per second (kg/ms) to nanoseconds per square meter (ns/m2), the conversion factor is 1 kg/ms 1,000,000,000 ns/m2.


What is the conversion rate for kgs to pounds?

To convert kilograms (kg) to pounds (lbs), you can use the conversion factor: 1 kg = 2.20462 lbs. So, to convert kg to lbs, you would multiply the number of kilograms by 2.20462 to get the equivalent weight in pounds.


What is the conversion factor of pounds per inch to Kilograms per mm?

To convert pounds per inch to kilograms per mm, you can use the following conversion factors: 1 pound = 0.453592 kilograms 1 inch = 25.4 mm Therefore, the conversion factor is approximately 0.017857 kg/mm.


How many BTU in 1 ton LNG?

1 kg of Lng of that particular quality will have say ' X ' k.cal per kg of calorific value from the data of LNG producer. Then 1 Ton of LNG will have 1000X when converted to B.T.U it will be 3967 multiplied by 1000 X What "particular quality" is referred to above??? Generally speaking 1 tonne (1000Kg) of LNG is considered to have a caloric value of 48 MMBtu