You've given only two dimensions, so what we have so far is a flat surface ... like
a large piece of shelf paper that's 64 inches long and 24 inches wide. That flat
strip of paper has an area of (64 x 24) = 1,536 square inches, or 102/3 square feet.
It has no cubic measurement at all until you give it a third dimension, make a box out of it,
and tell us what the height is.
All we can tell you now is that if you make a box with that flat 64 x 24 as its bottom,
the volume of the box will be 1.125 cubic feet for every inch of height.
A standard wooden pallet that is 40 inches by 48 inches typically weighs around 30-50 pounds when empty. The weight can vary depending on the type of wood used and any additional features like reinforcement bars. It's important to note that the weight can increase significantly when the pallet is loaded with goods.
It depends on the density of the wood as it can range from 170 to 1370 kg/cubic metre. At a total guess I would say less than 1 cubic feet.
You say 12'x12 `—> that ' is the sign for feet. so if the patio is 12 feet by 12 feet then it is 144 square feet. You don't say what measurement the "4 thick" is, but I presume it is inches. 4 inches is 1/3 of a foot, so divide the square footage by 3 and that will give you the cubic footage - if the patio is 12 feet by 12 feet and 4 inches thick then the cubic footage is 48.
To calculate the volume of water in the tank, we first convert the dimensions to inches: 4 feet = 48 inches and 6 feet = 72 inches. Then, we calculate the volume of the tank (48 x 72 x 6 = 20,736 cubic inches). Since there are 231 cubic inches in a gallon, we divide the total cubic inches by 231 to find the total gallons in the tank, which is approximately 89.8 gallons.
6ft long and what about width and height? gallons= L x W x H in inches and then divide by 231
48*40*52= 99840 cubic inches 99840*3 = 299520 cubic inches 299520 cubic inch = 173.33333333 cubic feet
1 cubic foot = 12 x 12 x 12 = 1728 cubic inches The given cube is 40 x 48 x 52 = 99840 cubic inches = 99840/1728 = 57.777 cubic feet
48 inches by 16 inches by 18 inches = 8 cubic feet.
That is approximately 40 cubic feet. - note,your measurements may not be accurate, I deal with many pallettes and have never seen a 40x40. - 48 " per side is standard.
Something measuring 48 feet by 40 feet by 57 feet will have a volume of 48 x 40 x 57 = 109440 cubic feet.
Volume = 40" * 48" * 48" = 40/12 ft * 4 ft * 4 ft = 10/3 ft * 4 ft * 4 ft = 160/3 cubic ft = 53.33... cu ft
There is not enough information to figure the cubic feet of the pallet. The depth would be needed for that. There is enough information to figure the surface area, which is measured in square feet, square inches, etc. To find the area of an object, take the length times the width. 40 inches X 48 inches = 192 square inches or 16 square feet.
To find the volume in cubic feet, first calculate the product: (48 \times 48 \times 80). This equals (184,320) cubic inches. Since there are 1,728 cubic inches in a cubic foot, divide (184,320) by (1,728) to convert to cubic feet. Thus, the volume is (106.67) cubic feet.
There is no answer to this because you are asking for a cubic measurement but providing only two out of three dimensions. You need three
The question cannot be answered because there is no information on the units used for the measurements given in the question. It should be obvious to anybody that the volume of 40 inches x 48 inches x 48 inches, for example, will be very different to the volume of 40 mm x 48 mm x 48mm.
12 in = 1 ft → 40 in × 48 in × 60 in = (40 ÷ 12) ft × (48 × 12) ft × (60 × 12) ft = 10/3 ft × 4 ft × 5 ft = 200/3 cu ft = 66 2/3 cu ft ≈ 66.67 cu ft
It is 4 feet because it equals 48 inches