When water is heated, it absorbs energy and its temperature rises, eventually reaching its boiling point where it turns into steam. When water is cooled, it releases energy and its temperature drops, eventually reaching its freezing point where it turns into ice.
Sort of. In the temperature range of 0-4 Degrees Celsius water contracts when heated and expands when cooled. Outside of this temperature range it behaves normally.
When water is heated, the molecules gain energy and move more quickly, causing the water to expand and eventually turn into steam. When water is cooled, the molecules lose energy and move more slowly, causing the water to contract and eventually freeze into ice.
The approach temperature difference (ATD) is used to determine the condenser performance of a water-cooled condenser. It is the temperature difference between the refrigerant condensing temperature and the cooling water inlet temperature. A lower ATD indicates better performance and efficiency of the condenser.
The air cooling of a chiller signifies , the cooling of radiator. in a chiller the compressor compressors the gas which on expansion cools in side Copper tubes causing the chilling effect. The refrigerants get heated up when compressed in a compressor. this heated refrigerant is cooled by blowing air in air cooled chillers. There are also water cooled chillers.
A heated can has under gone superficial (areal) expansion and when cooled suddenly by immersing in water "shrinks" in a very "haphazard" way leading to collapse. Now the forces at action are thermal- the so called thermal stresses. Now there is another example of how a can could collapse. Water is poured into a can and and heated so that copious steam formed could escape through an opening and then after sometime this opening is closed tightly and the can is "bathed" in cold water. The can collapses. The forces unleashed are different in this case!
what changes take place when water is heated or cooled
what changes take place when water is heated or cooled
you tell me
Sort of. In the temperature range of 0-4 Degrees Celsius water contracts when heated and expands when cooled. Outside of this temperature range it behaves normally.
When water is heated, the molecules gain energy and move more quickly, causing the water to expand and eventually turn into steam. When water is cooled, the molecules lose energy and move more slowly, causing the water to contract and eventually freeze into ice.
Water changes into a solid, ice, when it is cooled, not heated. This is because the cooling causes the water molecules to slow down and come closer together, forming a rigid structure. This process is called solidification or freezing.
Because they are more hollow.
Water changes from one state to another by being heated or cooled
No; water (as gas) must be cooled to become a liquid - this change is called condensation..
Yes, hot water or boiling water will kill or damage plant tissue and could result in death, even if this is applied to the soil. Once the boiled (or heated) water has cooled it can be used to water the plants with no side effects
The can crushing experiment is explained by the principle of thermal expansion. When a small amount of water is heated inside the can and then rapidly cooled by placing it in cold water, the steam inside the can condenses, creating a vacuum that crushes the can due to the difference in pressure inside and outside the can.
Most matter contracts as it gets colder. Water is one of the few substance that expands (from 4 degrees Centigrade to 0).