0
Volume measurement is measuring the amount of space occupied by a material. Its units of measure are cubic meters, or cubic centimeters, or liters, gallons, etc..
Flow measurement is the measure of how much of a material moves past a place in a specified amount of time. Its units of measure are gallons per minute, cubic feet per minute, cubic meteres pers second, etc.
Flow measurement is the quantification of bulk fluid movement and volume measurement is the system in which the solids/liquids are weighed/measured.
What else can I help you with?
What is the difference between an ampere and an ohm?
An ampere (A) is a unit of electric current, measuring the rate of flow of electric charge. Ohm (Ω) is a unit of electrical resistance, measuring how much a material resists the flow of current. In simple terms, amps measure the flow of electricity, while ohms measure the resistance to that flow.
What is difference between flow rate and flow velocity in flow tubes?
Flow rate is the volume of fluid passing through a section of the tube per unit time, usually measured in volume per unit time (e.g. cubic meters per second). Flow velocity is the speed at which the fluid is moving through the tube, usually measured in distance per unit time (e.g. meters per second). While flow rate depends on the cross-sectional area of the tube, flow velocity is independent of the tube's size.
What is the difference between mass flow and volumetric flow?
Mass flow is the amount of mass passing through a given point per unit time, while volumetric flow is the amount of volume passing through a given point per unit time. Mass flow takes into account the density of the fluid, while volumetric flow does not consider the density of the fluid.
What condition is necessary for electric charge to flow?
For electric charge to flow, there must be a potential difference (voltage) between two points in a conducting material. This difference in potential creates an electric field that exerts a force on the charges, causing them to move. Without a potential difference, charges will not flow.
What is the difference between a positive and non-positive displacement pump?
A positive displacement pump moves a constant volume of fluid for each cycle of operation, creating flow by direct displacement. In contrast, a non-positive displacement pump does not move a constant volume of fluid per cycle and relies on factors like speed and pressure to generate flow.
What is the flow volume difference between 1.25 inch vs 2 inch pipe?
If the flow velocity remains the same the flow volume will increase by the square of the diameter ratio.(2/1.25) = 1.6 = diameter ratio1.62 = 2.56 more flow volume through 2 inch pipe compared to 1.25 inch pipe.
Difference between laminar air flow and reverse laminar aire flow?
difference between laminar air flow & reverse laminar air flow
What is the difference between an ampere and an ohm?
An ampere (A) is a unit of electric current, measuring the rate of flow of electric charge. Ohm (Ω) is a unit of electrical resistance, measuring how much a material resists the flow of current. In simple terms, amps measure the flow of electricity, while ohms measure the resistance to that flow.
What is the basic Difference between flow chart and pseudo-code?
what's the difference between flow chart and structure diagrams and pseudo code
What is the net flow?
Net cash flow is the difference between income and expenditure.
What is net flow?
Net cash flow is the difference between income and expenditure.
What is the driving flow for the flow of electrons in batteries?
potential difference between electrodes
Difference between physical and logical DFD?
difference between physical and logical data flow diagrams.
What is the essential difference between Ostwald and Ubbelohde viscometer?
The essential difference between Ostwald and Ubbelohde viscometers is the method of measuring viscosity. Ostwald viscometer measures the flow time of a fixed volume of liquid through a capillary, while the Ubbelohde viscometer measures the flow time of a fixed volume of liquid out of a calibrated capillary. Additionally, the Ubbelohde viscometer is more accurate and suitable for measuring the viscosity of transparent liquids.
What is the difference between small and tall?
blood flow
What is difference between datalink layer flow control and transport layer flow control?
The difference between datalink layer flow control and transport layer flow control is the need to keep the different layers of data separate in the flow control option.
What is the net cash flow?
Net cash flow is the difference between income and expenditure.
