The predicted heat flux from a pool fire can vary depending on factors such as flame height, distance from the fire, and wind conditions. However, a rough estimate for a 3 meter alcohol pool fire with a heat release rate of 540 kW might be around 50-80 kW/m² at a distance of 5-10 meters from the fire.
A meter bridge is used to measure an unknown electrical resistance by comparing it with a known resistance. It works on the principle of Wheatstone bridge. By balancing the bridge circuit, the value of the unknown resistance can be calculated accurately.
Specific weight is a measure of the weight per unit volume of a substance. For liquids, specific weight is typically expressed in units like pounds per cubic foot or newtons per cubic meter. It is calculated by dividing the weight of the liquid by its volume.
The SI unit of electric flux is the volt-meter (Vm). It is calculated by multiplying the electric field strength (E) by the area (A) perpendicular to the field. The formula is E A.
The weight of a GI flat with dimensions 75x10 mm per meter length can be calculated as follows: 75mm x 10mm x 0.00785 (density of steel) = 5.8875 kg/meter.
The unit of electric flux is the volt-meter (Vm) or the newton-meter squared per coulomb (Nm2/C). It is calculated by multiplying the electric field strength (E) by the area (A) perpendicular to the field and the cosine of the angle between the field and the normal to the area. The formula is E A cos().
Meter is a unit of length and not area, so area can not be calculated in meters. Area can be calculated in square meters.
The chemical formula of isopropyl alcohol is C3H8O. The density of isopropyl alcohol is 786.00 kilograms per cubic meter.
The answer depends on side b of what!
WikiAnswers does not give information about illegal acts, such as tampering with with a TOD meter.
France calculated the meter. The meter was first defined as one ten-millionth of the distance from the equator to the North Pole, through Paris. This definition was adopted by the French Academy of Sciences in 1791.
The area of a circle is calculated as A = pi x r2
by I really don't know... Do you know .. Some a +b+c= d.
The total cost for 0.75 meters of chain at $4.80 per meter would be $3.60. This is calculated by multiplying the length of chain (0.75 meters) by the cost per meter ($4.80).
1 meter cubed is equal to 1,000,000 millimeters cubed. This is because there are 1,000 millimeters in one meter, and volume is calculated by cubing the linear unit. Therefore, 1 meter cubed is equivalent to (1,000)^3 = 1,000,000 millimeters cubed.
A meter bridge is used to measure an unknown electrical resistance by comparing it with a known resistance. It works on the principle of Wheatstone bridge. By balancing the bridge circuit, the value of the unknown resistance can be calculated accurately.
No. Caroline never married or had any children just as her father predicted because she had typhis and never grew much taller that 1 meter.
Meter Maids - 2011 was released on: USA: 1 August 2011