0
What else can I help you with?
What happen to the secondary circuit if the primary circuit is close?
If the primary circuit is closed, the current will flow through the primary coil, inducing a magnetic field. This magnetic field will in turn induce a current in the secondary coil, allowing for the transfer of energy from the primary to the secondary circuit.
What are the three circuits of a magneto?
The three circuits of a magneto are the primary circuit, secondary circuit, and charging circuit. The primary circuit controls the generation of an electrical current, the secondary circuit amplifies the voltage output, and the charging circuit ensures the magneto stays charged for optimal performance.
A loop with a break in it that prevents current from flowing is called?
an open circuit.
What is a break in an electrical circuit called?
A break in an electric circuit is called an open circuit. Electric current will not flow through an open circuit.
What is the difference in an open circuit and a short circuit?
an open circuit is a circuit that does not complete the circle. an open circuit does not do the job as the electricity stands still a short circuit is a circuit that wires have crossed and the electricity takes the shortest path. and does not complete all of the points on the circuit
What is a symptom of a bad spark-plug coil?
No Spark when primary circuit is functional. jb
Bleeding gums is a primary symptom of what?
It is a primary symptom of gingivitis.
What is the primary symptom of ptosis?
The primary symptom of ptosis is a drooping eyelid.
What is the primary symptom of Giardia infection?
Abdominal cramps is the primary symptom of giardia infection.
What is the only symptom of primary amenorrhea?
The only symptom of primary amenorrhea is delayed menstruation.
What is symptom of a circuit incorrectly wired?
Circuit breaker tripping, or non functioning outlet. The neutral and hot can be reversed, or an open ground, and you will have no symptoms. This can only be detected with a circuit tester you plug in to check the wiring.
What is the primary symptom of secondary amenorrhea?
In secondary amenorrhea, the primary symptom is the ceasing of menstruation for at least three months.
Where is the high side of transformer on open circuit test?
high voltage side call primary
When the transformer is connected to the power source the secondary current is 0 what is the possible fault in the transformer?
A secondary current of 0 would suggest to me that the secondary circuit is open. A normally operating circuit with zero current flow would be very unusual. No load in secondary circuit. No secondary current can also be attributed to the primary power source open or an open primary winding.
Ford Focus air bag code 44?
Flash Code Description/Information 12 / 52 Low Battery Voltage or VSS (12 volts) 13 / 53 Airbag (SRS) Or Crash Sensor Circuit Short Circuited To Ground or Earth 14 / 54 Primary Crash Sensor Circuit Short Circuited To Ground or Earth 21 Safing Sensor / Diagnostic Unit Not Properly Mounted 22 Safing Sensor / Diagnostic Unit Output Circuit Short Circuited To Battery Voltage or VSS (12 volts) 23 Safing Sensor / Diagnostic Unit Input Feed/Return Circuit Open Circuit 24 Safing Sensor / Diagnostic Unit Output Feed/Return Circuit Open Circuit 32 Driver's Airbag (SRS) Module Circuit High Resistance Or Open Circuit 33 Passenger's Airbag (SRS) Module Circuit High Resistance Or Open Circuit 34 Driver's Airbag (SRS) Module Circuit Low Resistance Or Open Circuit 35 Passenger's Airbag (SRS) Module Circuit Low Resistance Or Open Circuit 41 Right-hand Radiator Primary Crash Sensor Feed/ Return Circuit Open Circuit 42 Left-hand Radiator Primary Crash Sensor Feed/Return Circuit Open Circuit 44 Right-hand Radiator Primary Crash Sensor Not Mounted Properly 45 Left-hand Radiator Primary Crash Sensor Not Mounted Properly 51 Diagnostic Monitor Internal Thermal Fuse Blown (Replace Diagnostic Monitor) 52 Back Up Power Supply Voltage Boost Failure 53 Primary Crash Sensor Circuit Resistance To Ground Or Diagnostic Monitor Failure
Why us the power measured during the open circuit test considered to be approximately equal to the core loss?
During open circuit test on transformer, no load is connected across the secondary side. Hence, the total power drawn by the transformer is only to induce the voltage across the secondary, i.e., core loss AND negligible amount of primary copper loss. As the primary copper losses during open circuit are negligible, it is practice to attribute the open circuit power to core loss.
What is the primary symptom of niacin toxicity?
Flushing
