answersLogoWhite

0

An air conditioner works by compressing a gas into a liquid. This creates heat, which is vented outside.

The liquid is squirted through a restriction and looses pressure and turns back into as gas, this has a cooling effect. The pipework containing this gas has a fan blowing over it and so cools the air and blows it into the room, or car.

User Avatar

Wiki User

14y ago

What else can I help you with?

Continue Learning about Physics

In an air conditioner thermal energy is what?

In an air conditioner, thermal energy is the heat energy that is absorbed from the indoor air by the refrigerant as it evaporates in the evaporator coil. This thermal energy is then released to the outside air as the refrigerant condenses in the condenser coil, cooling the indoor air in the process.


How did the first air conditioner work?

The first air conditioner, invented by Willis Carrier in 1902, worked by blowing air over coils filled with cold water. This process removed heat and moisture from the air, resulting in cooler and drier air being circulated into the room.


How does a dehumidifier air conditioner work to regulate humidity levels in a room?

A dehumidifier air conditioner works by drawing in humid air, cooling it to condense the moisture, and then releasing drier air back into the room. This process helps regulate humidity levels by removing excess moisture from the air.


What is the working principle of an air conditioner?

If you are asking how it cools down the room, air conditioner or its vents are usually located at high areas. Since warm air rises, they take the warm air and make it cold. Cold air is denser and heavier which therefore falls. This process is repeated until the temperature of the whole room is the same. It uses a convection current.


How does an air conditioner work, and could you provide a diagram illustrating the process?

An air conditioner works by removing heat from the air inside a room and releasing it outside. This is done through a process called refrigeration, where a refrigerant absorbs heat from the indoor air, then releases it outside. The refrigerant cycles through the system, repeating this process to cool the air. A diagram illustrating this process typically shows the indoor and outdoor units connected by refrigerant lines, with a compressor, condenser, evaporator, and expansion valve involved in the cooling process.

Related Questions

Why is my air conditioner not working properly due to a frozen AC coil?

Your air conditioner may not be working properly because the AC coil has frozen. This can happen when there is a lack of airflow or a refrigerant leak, causing the coil to become too cold and freeze. This restricts the cooling process and can lead to reduced efficiency or complete failure of the air conditioner.


How can I tell if the coils are clogged in my central air conditioner?

Well, you can open it to find out. But mostly, you will know they are not working if the air conditioner blows hot air, or stops working all together.


Toyota Echo air conditioner?

A Toyota Echo air conditioner is designed to cool the vehicle. If the air conditioner stops working, it could be low on freon or the motor could have seized.


What is the difference between an air conditioner and a heat pump?

An air conditioner if functioning as air warmer or air chiller can be called as a type of heat pump. If an air conditioner is working as an air de-humidifier then it no more a heat pump.


A c not working on 1998 Ford Taurus?

air conditioner not working on off switch


How is air cooled by air conditioner?

by the process of heat transfer.freon in air conditioner absorbs heat from air,as boiling point of freon is too low.thus air cools


How can I go about replacing the cord on my air conditioner?

To replace the cord on your air conditioner, follow these steps: Unplug the air conditioner and make sure it is turned off. Remove the old cord by disconnecting it from the unit. Purchase a new cord that is compatible with your air conditioner model. Connect the new cord to the unit following the manufacturer's instructions. Plug in the air conditioner and test to ensure it is working properly. If you are unsure or uncomfortable with the process, consider hiring a professional to replace the cord for you.


What happens when the air conditioner unit stops working?

The room air temperature increases.


Your air conditioner and heater in your 2000 grand am is not working?

check fuse.


If air conditioner is working correctly should low side be hot?

no


Where are the senors for air conditioner on 1994 Chevy bretta?

air conditioner for1994 Chevy Beretta not working is there a senor that could be bad. system is charged.


How can I replace the power cord on my air conditioner?

To replace the power cord on your air conditioner, follow these steps: Unplug the air conditioner from the power source. Remove the old power cord by disconnecting it from the unit. Purchase a new power cord that is compatible with your air conditioner model. Connect the new power cord to the unit, ensuring a secure connection. Plug the air conditioner back into the power source and test to ensure it is working properly. If you are unsure or uncomfortable with this process, it is recommended to seek professional help.