0
Mass of 1 mole hydrogen gas (H2) = 2 grams.
So the mass of 22.4 liters (stp) H2 is 2 g. 1 kilogram = 1kg = 1000 grams.
1 cubic foot = 28.25 liters
1000 grams of H2 = 500 X 28.35 liters = 11,200 liters 11,200 liters = 396.460177 cubic feet Answer = ~396.5 cubic feet = Bonus answer - 14.68 cubic yards http://www.siei.org/usefulequations.html
What else can I help you with?
What is the specific volume of a gas weighing 5 pounds with a volume of 100 cubic feet?
The specific volume of the gas can be calculated by dividing the volume by the weight. In this case, specific volume = 100 cubic feet / 5 pounds = 20 cubic feet per pound.
How much hydrogen was in the Hindenburg airship?
The Hindenburg airship was filled with hydrogen gas, specifically about 7 million cubic feet of hydrogen. This highly flammable gas was used as a lifting agent to help the airship float.
If I split a gallon of water by electrolosis how many cubic feet of Browns gas would I get from it?
The exact amount of Brown's gas produced will depend on the efficiency of the electrolysis process and the volume of hydrogen and oxygen gases that are generated. However, typically, one gallon of water (which is approximately 0.1337 cubic feet) can produce about 1800 gallons of Brown's gas at standard temperature and pressure.
What is the volume of the container in cubic meters if it can hold 5 pam3 of gas?
The volume of the container is 5 cubic meters.
Jenny used 132 cubic feet of gas in march if the gas company charges 0.32488 per hundred cubic feet how much will she pay the gas company?
Jenny used 132 cubic feet of gas, which is equal to 1.32 hundred cubic feet. To calculate how much she will pay, multiply the amount of gas used (1.32) by the rate per hundred cubic feet ($0.32488). Therefore, Jenny will pay $0.43 to the gas company.
What is the volume of 15 gallons of gas in cubic feet?
Two cubic feet.
What is the specific volume of a gas weighing 5 pounds with a volume of 100 cubic feet?
The specific volume of the gas can be calculated by dividing the volume by the weight. In this case, specific volume = 100 cubic feet / 5 pounds = 20 cubic feet per pound.
What is the volume of gas in a 4 inch pipe 7000 feet long?
The volume of gas would be 598.7 cubic feet.
What is the density of 4 pounds of a gas that occupies 10 cubic feet?
0.4 pounds per cubic feet - a very massive gas!
What is the volume of one ounce mole of a gas at STP in cubic feet?
The volume of one mole of any gas at STP (Standard Temperature and Pressure) is approximately 22.4 liters. To convert this to cubic feet, we can use the conversion factor 1 liter equals 0.0353 cubic feet. Therefore, the volume of one mole of a gas at STP in cubic feet is approximately 0.791 cubic feet.
What is Ccf in natural gas?
A measure of volume- Ccf is one hundred (C) cubic feet (cf)
How is natural gas measured?
It is Measured in Volume as Cubic Feet
What is tcf unit of gas?
TCF stands for Thousand Cubic Feet, which is a unit of measurement commonly used to quantify the volume of natural gas. It represents one thousand cubic feet of gas.
How much is 4.8 cubic meters in cubic feet?
It all depends upon the density of the substance. 4.8kg of Hydrogen [gas] will take up much, much more cubic meters than 4.8kg of Mercury.Cubic meters are a measure of volume whereas kilograms are a measure of weight. Volume and weight are related by density = weight ÷ volume - the lower the density, the greater the volume for the same weight!
How much hydrogen was in the Hindenburg airship?
The Hindenburg airship was filled with hydrogen gas, specifically about 7 million cubic feet of hydrogen. This highly flammable gas was used as a lifting agent to help the airship float.
What is 1 MCF?
1 MCF (thousand cubic feet) is a unit of measurement commonly used in the oil and gas industry to quantify natural gas volume. It is equivalent to 1,000 cubic feet of natural gas.
What does MCF Natural Gas mean?
MCF stands for "thousand cubic feet," so MCF Natural Gas refers to 1,000 cubic feet of natural gas. It is a common unit of measurement used in the natural gas industry to quantify the volume of gas being bought or sold.
