0
What else can I help you with?
What would happen if a pendulum is set to swing in vacuum?
In a vacuum, the pendulum would continue to swing back and forth without air resistance to slow it down or stop it. This would result in the pendulum swinging with very little loss of energy over time, creating a more consistent and longer-lasting motion.
What would happen if you lit a peanut on fire?
When a peanut is set on fire, it will burn due to the fats and oils present in it. The peanut will produce a small flame and smoke as it burns. It will eventually be reduced to ash.
What Suppose a bicycle was coasting on a level surface and there was no friction. What would happen to the bicycle's speed?
If there is no friction, the bicycle's speed will remain constant due to inertia. Once set in motion, it will continue at the same speed unless acted upon by an external force.
Can set your hands on fire by rubbing your hands together?
No, rubbing your hands together will not set them on fire. Friction between your hands generates heat, but it is not enough to ignite them.
What in a theory is used to explain how things happen and what it consists of?
In a theory, the mechanism or framework is used to explain how things happen. It consists of concepts, principles, and relationships that aim to provide a systematic explanation of a phenomenon or set of phenomena. Theories serve as a guide to understanding and predicting how events unfold based on underlying principles.
Do you have to reset tappets after changing push rods?
yes you do have to set the tappets
How do you set tappets on Scania engine?
fire each valve set the 1 next 2 it
What is the tappets set at on cummins 6bt Engins?
tappet clearance 6bt cummins
How you set tappets of jeep Cherokee 4.0 lt?
They are not adjustable.They are not adjustable.
Do you have to remove the head to set tappets on a 1992 Ford Laser 1.3?
No just the rocket cover
How do you set rockers on Mk7 tdci transit?
Doesn't the transit use a tdci with hydraulic tappets?
How do you replace tappets on a Peugeot 307 1.6hdi?
To replace the tappets on a Peugeot 307 1.6 HDi, first, ensure you have the necessary tools and parts, including new tappets and a gasket set. Begin by removing the engine cover and timing belt, then take off the cylinder head to access the tappets. Replace the old tappets with the new ones, ensuring they are properly seated, then reassemble the engine in the reverse order, taking care to torque all bolts to the manufacturer's specifications. Finally, recheck the timing and ensure everything is securely fastened before starting the engine.
How do you set tappets on Renault clio 1.4?
To set the tappets on a Renault Clio 1.4, first, ensure the engine is cold and remove the valve cover to access the rocker arms. Use a feeler gauge to check the clearance between the rocker arm and the valve stem; the correct clearance specifications can usually be found in the service manual. Adjust the tappets by loosening the lock nut and turning the adjusting screw until the desired clearance is achieved, then retighten the lock nut. Finally, recheck the clearance and reassemble the valve cover.
How do you set tappets on ford sierra v6 3l?
To set the tappets on a Ford Sierra V6 3.0L, first, ensure the engine is cold. Remove the valve covers and use a feeler gauge to check the clearance between the tappet and the rocker arm. Adjust the tappets by loosening the lock nut and turning the adjusting screw to achieve the specified clearance, typically around 0.25 mm (0.010 inches) for intake and exhaust valves. Recheck the clearance after tightening the lock nut, and then reassemble everything once the correct settings are confirmed.
How do you set the tappets on a Toyota 1300cc 2e engine?
Actually "tappets" is a term that has not been used for a l;tong time. Yu are probably referring to the valves or lifters. If you are having a tapping sound coming from the top of your engine, the rockers probably have to be adjusted or there may be a problem with lifters or pushrods.
What would happen if you set fire to catnip?
It will smell like weed
How do you set the tappets on a kangoo 1.4?
To set the tappets on a Renault Kangoo 1.4, first ensure the engine is cold and remove the valve cover. Using a feeler gauge, check the gap between the tappet and the rocker arm; the correct clearance is typically around 0.15 mm for the intake and 0.25 mm for the exhaust valves. Adjust the tappets by loosening the lock nut and turning the adjuster screw until the correct clearance is achieved, then tighten the lock nut while holding the adjuster in place. Finally, recheck the clearance to ensure it remains within specification.
