When connecting a battery, the red wire should be attached first.
When connecting jumper cables to a car battery, you should hook up the red cable first.
When charging a battery, it is recommended to connect the red cable first, followed by the black cable. This is the standard procedure to ensure safe and proper charging.
When connecting jumper cables to a car battery, attach the red cable first before the black cable.
When charging a battery, you should always connect the red cable first before the black cable.
When performing a battery jump, the red color should be connected first.
should be right in front of the battery. The two hard lines on the plenum and one connecting it to the egr valve. Also there should be a black connector coming off your EFI harness attached to it
When connecting jumper cables to a car battery, you should hook up the red cable first.
Attached to neg post on battery should be labelled with (-) sign if not color coded black.
When charging a battery, it is recommended to connect the red cable first, followed by the black cable. This is the standard procedure to ensure safe and proper charging.
First you have to slide off the computer looking thing in front of the battery, you should then see the metal plate it was attached to - which is also holding down the battery... simply remove it with a wrench and disconect the battery cables (black first) and the battery should slide right out.
You don't say what you are connecting to the battery. If you have a black and white wire the best guess would be white to negative terminal and black to positive terminal. If you were connecting a 6V light bulb it really doesn't matter.
When connecting jumper cables to a car battery, attach the red cable first before the black cable.
i just connected my ac belt and there was a black wire that was disconnected from the battery and i attached it back to the battery
When charging a battery, you should always connect the red cable first before the black cable.
You can jumpstart your BMW 328 by connecting jumper cables to your battery and to the battery of another vehicle. Connect the red handles to the positive post, on each battery. Connect the black handles to the negative posts, on each battery. Start the working automobile to charge the nonworking battery.
Answer Red cable (+) goes to starter solenoid and Positive side of battery Black (-) cable goes to engine ground. When disconnecting a battery always disconnect the ground cable from the battery first. When connecting a battery always connect the ground cable to the battery last.
You can jumpstart your BMW 328 by connecting jumper cables to your battery and to the battery of another vehicle. Connect the red handles to the positive post, on each battery. Connect the black handles to the negative posts, on each battery. Start the working automobile to charge the nonworking battery.