If you're starting from scratch, there's really no important difference between them, either will do.
If you're building/buying something to work with existing equipment, then you'd have to figure out the frequency that'll work best together with that.
It depends on the context. For display screens and gaming, higher Hz (refresh rate) is better for smoother motion. For audio, lower Hz (bass frequencies) are important for richer sound.
No, they are not the same thing. 60 Hz refers to the frequency of the electricity supply, while a 60-watt light bulb refers to the power consumption or output of the bulb.
Some may, some may not. I remember a case where my city made a large investment in traffic lights... and found that they were for a different frequency, and couldn't be used. (I don't know how the case ended.) To be on the safe side, see the specifications; if it says "60 Hz", use it only for 60 Hz; if it says something like "50/60 Hz", you can use it anywhere.Some may, some may not. I remember a case where my city made a large investment in traffic lights... and found that they were for a different frequency, and couldn't be used. (I don't know how the case ended.) To be on the safe side, see the specifications; if it says "60 Hz", use it only for 60 Hz; if it says something like "50/60 Hz", you can use it anywhere.Some may, some may not. I remember a case where my city made a large investment in traffic lights... and found that they were for a different frequency, and couldn't be used. (I don't know how the case ended.) To be on the safe side, see the specifications; if it says "60 Hz", use it only for 60 Hz; if it says something like "50/60 Hz", you can use it anywhere.Some may, some may not. I remember a case where my city made a large investment in traffic lights... and found that they were for a different frequency, and couldn't be used. (I don't know how the case ended.) To be on the safe side, see the specifications; if it says "60 Hz", use it only for 60 Hz; if it says something like "50/60 Hz", you can use it anywhere.
The wavelength of a wave can be calculated using the formula: wavelength = speed / frequency. Given the frequency of 60 Hz and speed of 45 m/s, the wavelength would be 0.75 meters.
The period of a wave can be calculated using the formula T = 1/f, where T is the period and f is the frequency. Given that the frequency is 60 Hz, the period of the wave is T = 1/60 = 0.0167 seconds.
For a CRT, I find 75 hz much better, particularly when under florescent lighting. Since the lights run at 120 hz, the monitor can get into a 'synch' with the lights which creates moire patterns on the screen. Changing the rate to 75 or higher prevents this from happening and reduces eye strain. LCD screens (flat screens) are not likely to have this issue at all and it shouldn't matter.
75 Hz
600. Absolutely.
10 Hz 10 Hz
50 hz is better .At this freq several losses in motors and power sys r reduced a lot when compared to 60 hz .also in 60hz sys the laminations must made thinner increasing initial cost.the advantage of 60 hz is ,we know that in present turbo alternator sys speed obtained is much higher than 3000rpm so this can utilised upto 3600rpm in caseof 60 hz sys
The M70 Multimedia CRT Display D5259A has a maximum display of 1280x1024 at 60HZ. Supported Modes: Supported Resolution (dots x lines) Vertical Frequency or Refresh Rate 640 x 480 60 Hz 720 x 400 70 Hz 800 x 600 75 Hz 800 x 600 85 Hz 1024 x 768 60 Hz 1024 x 768 75 Hz 1024 x 768 85 Hz 1280 x 1024 60 Hz Datasheets: http://h10025.www1.hp.com/ewfrf/wc/genericDocument?docname=bph03695&cc=us&dlc=en&lc=en&jumpid=reg_R1002_USEN
the maximum rating is 60 hz . it is work in50hz
There is no inherent disadvantage of 50 Hz compared with 60 Hz, bearing in mind that systems that run at 50 Hz are designed to run at 50 Hz.
ye3s if you compare it to cod5 then you can see a large difference
In North America 60 Hertz. Europe 50 Hertz.
Everything, in a country like the USA where the normal supply works on 60 Hz.
If a bulb has 50 Hz frequency and it's supply is 60 Hz frequency, it will still glow, despite the allowance of 10 HZ frequency.