0
Which sensor can be used if distance between line and robot is 20cm to make a line follower robot?
It sounds like you are using an NXT unit, but to make a line follower, you don't find the distance between the robot and the line, you find the line and center it under you. I would recommend using the light sensor because it will allow you to find the area where the line is darker than the surrounding surface. Then, whenever the line is not centered under your robot, you have it go back and forth until it finds it.
What else can I help you with?
Use of ir sensor in robot?
An IR sensor in a robot can be used for various purposes such as obstacle detection, line following, distance measurement, and object detection. The sensor emits infrared light and detects the reflection to identify the presence or absence of objects in its path, allowing the robot to navigate its environment effectively.
How can you use the infrared sensor on ev3 to activate motor commands and do other things in proximity mode?
You can use the infrared sensor on the EV3 by programming it to detect objects at a specific distance, and then activate motor commands based on that input. By setting up a loop that continuously checks the sensor reading, you can trigger different actions such as moving the robot forward, backward, or stopping when an object is detected within the set proximity range.
How can you detect black line on the white surface in line following robot?
You can detect a black line on a white surface using infrared sensors that can distinguish the color contrast between the line and the surface. The sensors can detect the different reflectivity levels of the two colors and help the robot follow the line accordingly. Employing a PID (Proportional Integral Derivative) control algorithm can also assist in keeping the robot aligned with the black line.
What makes the robot move?
Robots typically move by using wheels, tracks, or legs that are powered by motors. These motors receive commands from a controller, which directs the robot's movement based on pre-programmed instructions or real-time sensor feedback. In more advanced robots, like those used in industrial settings, hydraulic systems may also be used to enable movement.
What is the body of a robot called?
The body of a robot is typically referred to as the chassis or frame. It serves as the main structure that houses the internal components and provides support for the robot's movements and functions.
Use of ir sensor in robot?
An IR sensor in a robot can be used for various purposes such as obstacle detection, line following, distance measurement, and object detection. The sensor emits infrared light and detects the reflection to identify the presence or absence of objects in its path, allowing the robot to navigate its environment effectively.
What are the advantages of line follower robot?
can be used in a driverless car
What are the parts of robot?
*robot sensor* robot arm*robot motor* metal
Flow-chart for line follower robot?
A flow-chart for a line follower robot typically starts with the "Start" node, leading to a "Read Sensors" process that detects the line's position. Depending on the sensor input, the flow branches into two paths: "Turn Left" if the line is detected on the right side and "Turn Right" if the line is detected on the left side. If the line is centered, the path continues straight. The loop continues until a "Stop" condition is met, such as reaching the end of the track.
How do you use a Lego light sensor?
For the newest kind of robot, the light sensor is used to detect the white lines from the dark lines on the nxt this helps your robot follow the lines!!
Why can one robot not detect another robot more than once until it has moved a predefined distance?
You must be talking about "follow" mode. When one robot follows the other the program must prevent the following robot from detecting the followed robot until it has moved a minimum predefined distance that is adjusted to prevent it from colliding with, or losing track of, the robot or whatever its following.
What is the Difference between a Scara and an Articulated Robot?
what is the Difference between a Scara and an Articulated Robot
What is robot manipulation?
Robot manipulation is the system of making a robot Do what you want it to do, and stop doing it when you want it to stop. it involves systems to make the parts of the robot move (mechanical, pneumatic/hydraulic) sensors and sensor calibration, setting safety thresholds and limits.
How is line follower robot used in future?
In the future, a line following robot could be used to lay groundwork for a small structure, repaint objects such as baseball diamonds, lay a trail of something down, or even plow the ground for farmers.
What is the difference between robot chicken and chicky robot?
Cartoon Network has been using Chicky Robot for Robot Chicken this season. They are the same.
How will you use a ultrasonic sensor building a robot?
I will use an ultrasonic sensor in my robot to measure distances to nearby obstacles, enabling it to navigate its environment safely. By emitting sound waves and measuring the time it takes for the echoes to return, the robot can determine how far away objects are. This information will be processed by the robot's microcontroller to adjust its movement, avoiding collisions and allowing for efficient pathfinding. Additionally, the sensor can help in tasks like object detection and automated navigation in various applications.
Line follower robot with comparator circuit?
maybe ask in adifferent way or go to a different site I'm a real person not a machine thank you bye
