The torque absent in an energy meter is the viscous torque. This type of torque is not present because energy meters are designed to measure the energy consumed or generated by a system, and viscous torque is a resistive torque generated due to viscous fluid flow which does not contribute to the energy measurement.
One newton meter is equal to the work done when a force of one newton is applied over a distance of one meter in the direction of the force. It is a unit of energy or torque, commonly used in engineering and physics.
The term for newton meter is "joule." It is the standard unit of energy in the International System of Units (SI) and is defined as the work done by a force of one newton acting over a distance of one meter.
The SI unit for torque is the newton-meter (N-m). The SI unit for angular momentum is kilogram square meter per second (kg.m^2/s).
A newtonmeter (Nm) is a unit of measurement for torque, which is the measure of the amount of rotational force applied to an object. It is equal to one newton of force applied at a distance of one meter from the pivot point.
The moment of a force is the multiple of the force and the distance from the point of application. An example is in tightening wheel nuts. The torque spanner used has a calibration in ft.lb or Newton.meters, so that the correct tightening torque is applied. If the shaft was made twice as long, the necessary force at the shaft end would be half as much. The concept of energy E= fd = -f.d + fxd where f is vector force and d is vector displacement. Energy is a quaternion consisting of a real and three vectors.Work is the real moment of force w= -f.d and Torque is the vector moment of force t=fxd.
it intial power is low and did not produce much energy
The deca Newton meter of torque is 0.1 to one Newton meter. In relation to the kilo meter of torque, it is .001. Many converters are available online for torque measurements.
It depends on the type of energy:Foot-pound (torque)Newton-meter (torque)Joule (energy in general)Watt-second (electricity)Kilowatt-hour (electricity)BTU (heat)Calorie (heat)
1 newton x 1 meter can be one of the following:A) A joule, the unit of energy and of work.B) The unit of torque. In this case, it is written newton-meter; there is no special name for it. This use is completely unrelated to the unit of energy, even though it happens to use the product of the same units.1 newton x 1 meter can be one of the following:A) A joule, the unit of energy and of work.B) The unit of torque. In this case, it is written newton-meter; there is no special name for it. This use is completely unrelated to the unit of energy, even though it happens to use the product of the same units.1 newton x 1 meter can be one of the following:A) A joule, the unit of energy and of work.B) The unit of torque. In this case, it is written newton-meter; there is no special name for it. This use is completely unrelated to the unit of energy, even though it happens to use the product of the same units.1 newton x 1 meter can be one of the following:A) A joule, the unit of energy and of work.B) The unit of torque. In this case, it is written newton-meter; there is no special name for it. This use is completely unrelated to the unit of energy, even though it happens to use the product of the same units.
A torque sensor, or torque meter, is a device that measures the torque on rotating systems, usually wheels. Torque, in this case, is the twisting force that causes rotation, such as that applied when you pedal a bicycle.
A Newton metre measures torque. It can also be used to measure energy, in which case, it is the equivalent of a joule.
IT means when torque is not zero even at zero power factor?? are you in IPU??
Torque is vector energy. Physicists have mistakenly defined energy as a scalar. Energy is a quaternion consisting of scalar energy (potential) and vector energy (torque). The units of torque is Joules or Newton meter, the same as work or energy..Here is the correct definition of Energy = FD = -F.D + FxD where F is force vector in Newtons and D is displacement vector in meters.F.D = - FDcos(Angle) is the Work or scalar energy and FxD=FDsin(Angle) is the Torque or vector energy. If the angle between the force and displacement is 90 degrees there is only torque; if the angle is a zero degrees there is only work or scalar energy ; if the angle is not a multiple of these two angles there is both scalar and vector energy; work and torque. E.g FD= -Fdcos(45) + Fd sin(45) gives work and torque.
The newton metre is a unit of torque (or moment).
Joules are the unit for energy; newton-metres (Nm) are used - despite being equivalent units - because the two values used are distance and force, not energy. It also makes calculation easier by preventoing confusion over the units to be used, especially since torques are often divided by distance to get force and vice-versa.
The principle of the energy meter is very simple. i.e., if you place the conduction material between the two magnetic field, that will experience the rotating torque. The torque developed will be proportional to the flux developed. Thus the developed torque will used to run the standard scales.
Newton x meter is joules. (Please note that Nm is also used for torque; in this case, it happens to have the same units, but it is unrelated to energy, and can therefore not be converted to energy units.)