0
A clinical thermometer may crack in hot water due to rapid expansion of the glass material when exposed to extreme temperatures. The sudden change in temperature causes stress on the glass, leading to cracks or breakage. Additionally, if the thermometer is not designed to withstand high temperatures, it may not be able to handle the heat and crack.
What else can I help you with?
Why should a clinical thermometer not be sterilize in boiling water?
Because clinical thermometer have a very small range. (20 to 45 degrees Celsius at most) and if placed in boiling water, the water being 100 degrees will cause damage to the thermometer.
Why care must be taken when disposing of a mercury-in-glass thermometer?
Well i'm not that old but i know a few:1)The thermometer will be of two types; a) Clinical Thermometer b) Laboratory Thermometer;a) The Clinical Thermometer: used to measure the temperature of the human body, at home, clinics and hospitals.b) The Laboratory Thermometer: used to measure the temperature in school and other laboratories for scientific research.Precautions:Wash the thermometer before and after use with an antiseptic solution, and handle it with care.See that the mercury levels are below the kink and don't hold the thermometer near its bulb.While noting down the reading in the thermometer, place the mercury level along the eye sight.Do not place the Clinical thermometer in a hot flame or in the hot sun.Note:The Clinical Thermometer should go above 108*F (42*C) and below 94*F (35*C) otherwise it might blow off the top and leak. Therefore, a Clinical Thermometer is used to measure the body temperature.
What happens to the mercury level when the cold thermometer is kept in a hot tub of water?
The mercury level in a thermometer placed in a hot tub of water will rise as the temperature of the water increases. This is because the volume of liquid mercury expands with higher temperatures, causing it to climb up the measuring scale in the thermometer.
How can one measure the temperature of hot air oven should i check it hanging thermometer in it through measument soket provided or keeping water in it and dipping thermometer in it through soket?
If you ever want to measure a temperature above 212 degrees, you're better off hanging the thermometer into the air in the oven. Since it's a hot-air oven, you want to measure the air. If it were a hot-water oven, you might prefer to measure water. But even then, what are you gonna do above 212, when the water goes away and all you have in there is steam ??
Why does a stem in clinical thermometer have a small cross section area?
The small cross section of a clinical thermometer is there to reduce the amount needed of the toxic mercury to as little as possible. Mercury is less used nowadays, as breakages were likely due to the violent shaking needed to 'reset' the thermometer.
Can you measure the temperature of a hot tea with a clinical thermometer?
No, the temperature of hot tea is substantially higher than the maximum that a clinical thermometer is designed for.
Can you measure the temperature of hot tea with a clinical thermometer and why?
No, a clinical thermometer is not suitable for measuring the temperature of hot tea as it is designed for measuring human body temperature. The high temperature of the hot tea could damage the clinical thermometer or give inaccurate readings. It is better to use a food thermometer designed for measuring the temperature of liquids.
Can you measure temperature of hot tea with a clinical thermometer?
no. as the clinical thermometr will burst
What would happen if you used a clinical thermometer to measure a hot drink?
Using a clinical thermometer to measure a hot drink can result in inaccurate readings as most clinical thermometers are not designed to measure temperatures of hot drinks. This can damage the thermometer and give false temperature values. It is recommended to use a thermometer specifically designed for measuring high temperatures in such cases.
Why does bulb of a clinical thermometer break when placed in very hot water?
The bulb of a clinical thermometer breaks when placed in very hot water because the sudden increase in temperature causes the air inside the bulb to expand rapidly. This rapid expansion of air creates pressure within the bulb, leading to its breakage.
What happens when you put a clinical thermometer into boiling water?
A clinical thermometer is designed to measure body temperature accurately, not high-temperature environments like boiling water. Putting a clinical thermometer into boiling water can damage the thermometer, resulting in inaccurate readings and potentially posing a safety risk. It's best to use thermometers specifically designed for measuring high temperatures in such situations.
If i use a thermometer what will be the temperature in the plastic cup with hot water?
That depends on how hot the water is in the cup. Use the thermometer to measure it and see.
What tool do you use to measure how hot water is?
A thermometer is used to measure the temperature of hot water.
What happened when thermometer dipped in hot water?
When a thermometer is quickly dipped in hot water, it won't do anything. If you leave the thermometer in the hot water, the temperature shown will read higher. The temperature shown will not exceed the temperature of the water.
Why should a clinical thermometer not be washed in hot water?
The idea is based avoiding use of the thermometer when it is reading "higher" than what it is that is being measured. Let's look at what's happening. If we wash a clinical thermometer in hot water, it will respond to that hot water. That will cause the reading to shoot up well above a hundred degrees. If we then try to use it, it will have to "cool down" under the tongue of the person we're using it on. It is actually being cooled by that person. The thermometer will take a relatively long time to reach the temperature of the individual whose temperature is being measured. And this time will vary, but will be longer than it would be for the thermometer to "come up" to temperature. One of the directions for using these thermometers is to first shake it down until it reads less than 95 degrees or so. If you're starting with a thermometer than has just been washed in hot water, you're not going to be able to shake it down per the directions. You'll have to run it under cool water for a bit to cool it so you can use it.
Why should a clinical thermometer not be sterilize in boiling water?
Because clinical thermometer have a very small range. (20 to 45 degrees Celsius at most) and if placed in boiling water, the water being 100 degrees will cause damage to the thermometer.
What is used to find out how hot boiling water in science?
a thermometer
