0
What else can I help you with?
In luminous flame the flame is produce when the air hole is open or close?
A bunsen burner (as used in a science lab or science classroom) will burn quietly, and a flickery yellow (like a wax candle) if the air hole is closed, or closed too much. If the air holes is opened, the flame will turn bluish and become noisy and hotter as more air mixes with the gas.
Why it is possible to see non-luminous objects?
It's often possible to see non-luminous objects if you illuminate them with a source of light, such as a flashlight, a candle, or a drop of golden sunshine. No object absorbs all of the light that falls on it, so some light is always reflected from it, and some of that reflected light finds its way to your eye. Once any of the light falling on the object has reflected from it, it's very much as if the object were self-luminous.
How much light does a torch give off?
A torch typically emits around 15-100 lumens of light, depending on the type and brand of the torch.
How much noise does a safety flame make?
A safety flame typically produces very little noise, if any at all. The noise level is generally minimal as the flame burns steadily and quietly.
What is the name given to an object which gives out its own light?
As matter becomes excited(heated) it releases photons of light. Stars do this very well through nuclear fusion. These photons are observed by us on earth. The moon, and other planets in our solar system are close enough that they are observable via light that is reflected off of them from our own sun. Most other planets in distant solar systems are only recently observed by observing a distance star's very subtle movement as the mass of it's orbiting planets pulls on it, much like our planet experiencing tidal flows in our oceans caused by our moon. These very distant planets are mostly invisible to us, unless they happen to eclipse a star.
What are the two kinds of flames produced by Bunsen burner?
The two kinds of flames produced by a Bunsen burner are the luminous flame (yellow flame) and the non-luminous flame (blue flame). The luminous flame is cooler and produces soot, while the non-luminous flame is hotter and ideal for heating and sterilizing.
When the Bunsen burner is on but no experiment is being carried out why is it advisable to set it to the luminous flame?
So you don't burn yourself. If it's on and you're not paying attention to it, a luminous flame is easily glimpsed in your peripheral vision. If the flame was non-luminous, it's much harder to detect and causes a greater risk. the non-luminous flame also burns much hotter.
What kind of flame are produced by the Bunsen burner?
The two types of flames a Bunsen burner can produce are a luminous, yellow flame and a "roaring" blue flame. The blue flame is much hotter than the yellow flame.
Why is it advisable to put off a non luminous flame when not in use?
Non- Luminous can burn efficiently because luminous flames don't burn as efficiently as non-luminous ones, they don't produce as much energy. This means that the non-luminous flames have a lot more energy than luminous ones, and their flames are actually hotter. This is why the luminous ones look yellow and the non-luminous ones look blue. Hotter flames burn blue and (relatively) cooler ones burn yellow.
In luminous flame the flame is produce when the air hole is open or close?
A bunsen burner (as used in a science lab or science classroom) will burn quietly, and a flickery yellow (like a wax candle) if the air hole is closed, or closed too much. If the air holes is opened, the flame will turn bluish and become noisy and hotter as more air mixes with the gas.
What is meaning non luminous?
It means without light. Like luminary means with much light.
What are the advantages of using a non-luminous flame?
Non- Luminous can burn efficiently because luminous flames don't burn as efficiently as non-luminous ones, they don't produce as much energy. This means that the non-luminous flames have a lot more energy than luminous ones, and their flames are actually hotter. This is why the luminous ones look yellow and the non-luminous ones look blue. Hotter flames burn blue and (relatively) cooler ones burn yellow.
What is the yellow flame on a Bunsen burner used for?
It indicates that the air hole is closed. The yellow flame is also called the luminous flame and the safety flame. It is luminous due to small soot particles in the flame which are heated to incandescence. The yellow flame is considered "dirty" because it leaves a layer of carbon on whatever it is heating.It is considered safe as it is more visible than the near invisible and hot non-luminous flame (it can be obtained by half opening the air hole) as people would not mistake it as switched off and touch it. It is usually not used for heating as it's not as hot as the non-luminous flame(also called the blue flame). The blue flame is hotter as it produces more heat energy than light energy, comparing it to the yellow flame, which produces more light energy than heat energy.
What makes the flame of the tirrill burner luminous?
Luminous flames are formed when the energy released is at a certain part of the electromagnetic spectrum. A red flame is given off when the energy is at the same energy and wavelength of red light. A yellow sooty flame is much lower energy and caused by a lack of oxygen. Burning fuels produce heat. Heated atoms and/or molecules emit a photon as they return to a lower energy state. Look at various flames, You may see concentric areas that are like layers, each one a different color. The fuel breaks up or is oxidized differently in each layer and each has a distinct temperature and chemical makeup. Not all emitted light from a flame is visible, a lot is emitted in the infrared spectrum which we cannot see but will feel as it heats our skin. Some flames are totally invisible, like from hydrogen. Some emitted light is only at very specific (narrow) frequencies, which we will see as certain colors, light and dark blue from methane premixed with air in a Bunsen burner or stove-top gas range. Hot carbon atoms emit over a very wide range of frequencies at random, so we see yellow light from candles. If hot enough, carbon emits a bluish white light, like from acetylene/oxygen.
Which flame on a Bunsen burner is used to heat chemicals?
It depends what you want to do! A blue flame is typically much hotter than a yellow flame. Sometimes you want to heat something very hot, and sometimes you want to heat something gently... and so you can choose which part of the flame best suits the purpose! blue flame
Why it is possible to see non-luminous objects?
It's often possible to see non-luminous objects if you illuminate them with a source of light, such as a flashlight, a candle, or a drop of golden sunshine. No object absorbs all of the light that falls on it, so some light is always reflected from it, and some of that reflected light finds its way to your eye. Once any of the light falling on the object has reflected from it, it's very much as if the object were self-luminous.
Properties of luminous and non-luminous flames?
luminous flames have a bluish to violet color and it means that the system is given enough oxygen for the reaction. Luminous flames will not produce soot. non luminous flames are orange, red, and yellow much like your everyday campfire but this system is not given enough oxygen therefore produce soot.
