answersLogoWhite

0

To give a larger surface area, increasing the strength of the hold

User Avatar

Wiki User

14y ago

What else can I help you with?

Continue Learning about Physics

What is the seperation to nuts and bolts?

Most separation nuts are externally actuated using an impulse or pressure type cartridge.


What is difference between nut and bolt?

Many people head to hardware stores searching for particular nuts or bolts without actually knowing exactly what they need. In cases like this, it is important to understand the differences that tend to cause confusion between these hardware parts, especially the like of nuts, bolts and screws. A nut can be given a simple definition as a small metallic object, shaped in a way as to allow for easy and firm grip, with a spiral cut groove that runs around a hole in its centre. The spiral groove is referred to as the thread. A bolt on the other hand is a metallic piece with a round stem as its body and threaded into one end, with a head to provide firm gripping at the other end. Bolts form the key part of a threaded connection. Some types of bolts are threaded for the full length and others are threaded for just a small length of the end. One key difference between bolts and nuts is that bolts come in various length and sizes. The choice of bolt depends on the thickness of the material between the bolt's head and the nut. However, there's no particular type of metal that is used to make nuts or bolts. The most common metal used, though, is carbon steel, often coated with zinc to prevent corrosion. Notably, bolts made from stainless steel, a high grade steel material with a large percentage of nickel or chrome, are used in corrosive atmospheres. Other materials that can be used to make bolts and nuts include aluminum, plastic, brass and just steel. Selecting the type of nut and bolt to use depends on a number of factors including environment and strength.Both nuts and bolts come in many types. Nuts come in the form of hex, cap, coupler, wing, turnbuckle and lock types. The hex nuts are six-sided and a standard spanner is used to turn them. Coupler nuts have some similarity with hex nuts except for their bigger thickness. Like their name suggests, coupler nuts are used to connect two bolts together. As for bolts, there are the hex type, square, round and flat head bolts, studs and threaded rods both of which have no heads, anchor bolts nor toggle bolts. Summary A nut is a small metallic piece of metal with a spiral cut groove that runs around a hole in its centre while a bolt is a metallic piece with a round stem as its body and threaded into one end. Bolts have different length sizes while nuts have a standard size.


What is a tire iron and how is it used in relation to changing a flat tire?

A tire iron is a tool used to remove and tighten the lug nuts on a wheel. It is typically L-shaped and has a flat end for leverage. When changing a flat tire, the tire iron is used to loosen the lug nuts before lifting the car with a jack and removing the flat tire. After replacing the tire, the lug nuts are tightened using the tire iron to secure the wheel in place.


What does a wrench look like?

A wrench typically has a long handle with a fixed or adjustable jaw at one end. The jaw is designed to grip nuts and bolts of various sizes. Wrenches come in different shapes and sizes, with some having a flat or ratcheting head.


What kind of simple machine is spanner?

A spanner is a type of lever, more specifically a wrench, used for tightening and loosening nuts and bolts.

Related Questions

What are the different types of washers used in bike wheel maintenance?

The different types of washers used in bike wheel maintenance include flat washers, lock washers, and spring washers. Flat washers are used to evenly distribute pressure and prevent damage to the wheel. Lock washers are used to prevent nuts and bolts from loosening. Spring washers provide tension to keep nuts and bolts securely in place.


What are three types of mechanical locking systems used to retain nuts and bolts?

Lock washers, Self locking nuts, Double (Jam) nuts,


What is sheradised?

Shearadized is a metal coating for nails, bolts, washers, nuts and so on, that is similar to Galvanized.


What is the meaning of 12x24x2.5 mm Galvanised Plain washer?

Galvanised washers reduce rust (it's the dull grey 'painted/dipped' nuts and bolts) Inside diameter of 12mm, outside diameter of 24mm at 2.5mm thick. Plain washers are circular and flat.


What will hold two boards together better a screw a nail or a bolt?

If we are speaking of only one fastner, then the bolt,especially if used with washers are far the best. It depends on how the boards are oriented. If you're trying to strengthen two planks (flat side to flat side) and you have the room (after they're installed) then bolts, washers, lock washers, & nuts are the best. Screws set in at angle will hold better than nails. If this is a permenant application, you can use liquid nails, but it really isn't necessary.


What are the available American Standard toilet seat parts?

The available American Standard toilet seat parts include hinges, bolts, nuts, washers, and bumpers.


What is the other half of the phrase nuts and?

Nuts and bolts.


What are the main types of fasteners?

Screws, bolts, nuts, washers, rivets, nails, and pins are some of the different types of fasteners. Screws and bolts are threaded fasteners used to assemble objects; screws are often used with pre-drilled holes, while bolts come with nuts. Nuts and bolts form secure connections, while washers spread the weight and prevent damage. Rivets are permanent fasteners used in structural applications. Nails are generally employed in woodworking, whereas pins, such as cotter pins, hold items in place. Each kind performs a distinct role depending on the assembly's requirements. Also, do visit Bhansali Fasteners one of the leading Fasteners Manufacturers in India. As a fastener manufacturer, we provide a variety of fasteners such as bolts, nuts, screws, washers, and more. We manufacture, stock, and provide all types of stainless steel fasteners in various sizes at the greatest prices.


How can I securely fasten wood together using carriage bolts?

To securely fasten wood together using carriage bolts, first drill holes through the wood pieces that are slightly larger than the diameter of the bolts. Place the bolts through the holes and add washers and nuts on the other side. Tighten the nuts with a wrench to secure the wood pieces together. Make sure the bolts are long enough to go through all the wood pieces and leave enough room for the nuts to tighten properly.


How do you remove license plate bolts from rear of 1995 Mitsubishi 3000GT that has bolts and nuts behind bumper turning together?

use a flat tip screw driver and pry out on the bolts as you turn them if you can get behind the plate


What is the proper way to install and tighten toilet bolts to secure a toilet in place?

To install and tighten toilet bolts properly, place the toilet on the flange, insert bolts through the base, add washers and nuts, and tighten evenly with a wrench. Be careful not to overtighten to avoid damaging the toilet or flange.


What does the website chite provide for customers?

The Chite website provides Bolts, Screws, Nuts, Anchors, Washers and other hardware products. You can view all available products at the Chite TW website.