That is likely "air hammering" which plagues many home plumbing systems. A plumber can install a simple device that will control it.
A lever in the bathroom is typically found on the toilet. It is used to flush the toilet after use.
A toilet plunger works by creating a seal around the drain opening and using suction to dislodge and push clogs through the pipes. The plunging motion creates pressure that helps to break up and remove blockages in the toilet.
The water in your toilet moves because of the flushing mechanism. When you flush, water is released from the tank into the bowl, causing the water level to rise and then drain away, creating the swirling motion.
The water in your toilet moves because of the force of gravity and the design of the toilet's flushing system. When you flush the toilet, water is released from the tank into the bowl, creating a siphon effect that pulls waste and water down the drain. This movement helps to remove waste from the bowl and refill it with clean water for the next use.
When you plunge a toilet, the force created by the up and down motion of the plunger helps to dislodge the clog by creating pressure and suction. This action can break up the blockage and allow it to move through the pipes, restoring proper flow and unclogging the toilet effectively.
The toilet may not flush due to a clog in the pipes, a malfunctioning flush mechanism, or insufficient water in the tank.
The toilet may not flush completely due to a clog in the pipes, a faulty flapper or flush valve, insufficient water pressure, or a problem with the toilet's design.
You will probably clog your toilet or pipes if you flush anything but toilet paper. I would not recommend trying to flush underwear down the toilet.
The hotel toilet may not flush properly due to clogs in the pipes, a malfunctioning flush mechanism, or insufficient water pressure.
The toilet may not flush with force due to a clog in the pipes, a problem with the flushing mechanism, or insufficient water pressure.
A slow and incomplete toilet flush can be caused by a clog in the pipes, a problem with the flushing mechanism, or insufficient water pressure.
The toilet may not flush properly due to clogs in the pipes, a faulty flapper or flush valve, low water level in the tank, or a problem with the water pressure.
The toilet may flush slowly due to a clog in the pipes, a malfunctioning flapper or fill valve, or low water pressure.
The toilet may not flush all the way due to a clog in the pipes, a problem with the flushing mechanism, or insufficient water pressure.
The toilet may not flush properly due to a clog in the pipes, a malfunctioning flapper or fill valve, or insufficient water pressure.
A toilet may flush slowly due to clogs in the pipes, a malfunctioning flapper or fill valve, or low water pressure.
The toilet may not flush all the way due to a clog in the pipes, a problem with the flushing mechanism, or insufficient water pressure.