It's more practical and less complicated for most applications
When referring to weight in tons, it is generally measured in short tons (2,000 pounds) or metric tons (1,000 kilograms). The weight of an object in tons would indicate how many tons it weighs, whether it is in short tons or metric tons.
130 tons is equal to 260,000 pounds. Pressure is typically measured in pounds per square inch (psi), so the pressure would depend on the area over which the 130 tons is distributed.
Gold is measured using the metric system, typically in grams or ounces. The purity of gold is measured in karats, with 24 karat being pure gold. The weight and purity of gold are important factors in determining its value.
To convert tons (metric tons) to cubic meters (bcm) for a bulk density of a material, you need to know the density of the material in tons per cubic meter. Once you have the density, you can use the formula: volume (bcm) = mass (tons) / density (tons per cubic meter). This will give you the equivalent volume in cubic meters.
Corn is typically sold by weight, usually measured in tons or pounds. A bushel is a unit of volume typically used to measure crops like corn, wheat, or soybeans. The weight of a bushel of corn can vary depending on factors like moisture content.
Good question but you can't figure it out unless you know the density of the substance. Tons is a measure of mass/weight & cubic feet is a measure of volume. Density is measured in mass per unit volume.
Mass divided by time, where the mass is measured in tons and the time is measured in hours. If the mass and time are measured in other units they will need to be converted to tons and hours.
Yards is a linear measure you can't calculate how much it weighs ... that's like asking 'How much does one mile weigh'. Some times "yard" is used to mean "Cubic Yard" but even then we would need to know what MATERIAL you want to calculate.
Tons can't be converted to yards. Tons measure mass, while yards measure length.
Tonnes do not measure volume.
Generally liquid is measured in units of volume such as litres or gallons. In large quantities liquids can be measure in units of mass such as tons (of oil for instance)
Volume can be measured in a variety of units.In metric: liters, milliliters, etc.In imperial: gallons, cups, ounces, tons etc.You can also use cubic measures of length: a cubic meter, a cubic foot, etc.These are all units of volume: http://en.wikipedia.org/wiki/Category:Units_of_volume
ounces
The conversion of tons to milliliters depends on the substance being measured. As an example, for water, 1 ton is equal to 1,000,000 milliliters. Therefore, 150,000 tons would be equivalent to 150,000,000,000 milliliters.
You cannot. Cubic feet per second is a flow rate measured in terms of volume, while tons per hour is a measure of flow rate in terms of mass. Volume and mass are two different measures and according to basic dimensional analysis, conversion from one to the other is not valid.
The volume is 100,928 cubic metres.
By multiplying the volume by the substance's density in tonnes per unit volume.