0
What else can I help you with?
Why is easier to open a door by applying the force at the free end?
Applying force at the free end of a door increases the distance from the hinge, creating a greater torque which helps overcome the resistance of the door's weight. This leverage amplifies the force applied, making it easier to open the door with less effort.
Why it is difficult to shut the door from a point near to hinge?
The rotational equivalent of force is called torque. It is the product of (force) x (distance to the axis of rotation) x (a function of the angle at which force is applied). You can assume the last factor is equal to 1, if the force is applied at a right angle. If the distance to the axis of rotation - the hinge - is small, a certain force produces only a small torque.
Why is it easier to push open a door with the knob not the hinges?
It is easier to push open a door using the knob because the knob is located further away from the hinge, which means the force from pushing is applied farther from the rotation point (hinge), resulting in less resistance. Additionally, the design of the knob allows for a better grip, making it easier to apply force effectively.
Why is the door handle on the opposite side of the door to the hinge?
Placing the door handle opposite the hinge allows for easier opening and closing of the door. When the handle is on the opposite side, it provides better leverage and makes it more intuitive for users to grasp and operate the door.
Why is it easier to open a door by holding it from its edge?
Holding a door from its edge gives you more leverage because you are further away from the hinge, making it easier to push or pull the door open. This leverage allows you to use less force to move the door compared to holding it closer to the hinge.
What are the advantages of a right hinge door in comparison to a left hinge door?
A right hinge door may be advantageous over a left hinge door for individuals who are right-handed, as it allows for easier access and movement when opening and closing the door. Additionally, a right hinge door may be more convenient in certain room layouts or configurations.
How did the hinge bone get its name?
It got its name because it acts as a hinge, only opening and closing a certain distance. Your elbow is a hinge joint. Think of your elbow as a hinge on a door in your house. The door is your forearm and the door frame is your upper arm/body.
Why is easier to open a door by applying the force at the free end?
Applying force at the free end of a door increases the distance from the hinge, creating a greater torque which helps overcome the resistance of the door's weight. This leverage amplifies the force applied, making it easier to open the door with less effort.
What is the explanation for the term 'Throw of the hinge'?
The throw of the hinge determines how the hinge opens by where the hinge is set; it is the distance from the outside edge of the hinge to its placement point on the door and jamb. A widethrow hinge sets the pintel or pivot point away from the door to allow it to open up to 180°. Wide jambs usually require a wide throw hinge to allow the door to move unobstructed.
Does the door hinge adjust where the hinge is attached to the hinge post?
door hinges attached to door and hinge post
Why would it be harder to open the door if you ppushed on the center?
If you push on the center there is less distance to the hinge. The greater the distance from the hinge, the greater the torque to open it for the same force ( force x distance = torque)
How do you replace door hinge pin and bushing on Crown Victoria?
The pin will probably have to have the bottom end that is flared out cut off or drilled out. The pin can then be tapped out. This is easier if the hinge has been removed but then the door will have to be blocked up into place while the hinge is off.
What is the name for pin that slides into a door hinge?
The pin that slides into a door hinge is called a hinge pin. It is usually removable to allow for door removal or adjustment.
Have the door hinge screws stripped?
Are the screws on the door hinge stripped?
Why cant you open a door by pushing on its hinged side?
to open the door toque must be applied on it. torque = force * perpendicular distance when the door is pushed at the hinge perpendicular distance is zero. Hence, it can not be opened
Why is it easier to close a door by the handle than by the hinge?
Learn why here: http://www.enchantedlearning.com/physics/machines/Levers.shtml
Why it is difficult to shut the door from a point near to hinge?
The rotational equivalent of force is called torque. It is the product of (force) x (distance to the axis of rotation) x (a function of the angle at which force is applied). You can assume the last factor is equal to 1, if the force is applied at a right angle. If the distance to the axis of rotation - the hinge - is small, a certain force produces only a small torque.
