A few reasons:
1. The spout acts as a throttle on the flow of water...it narrows and restricts the stream.
2. The flow through the funnel is due more to gravity, than to the velocity of the water flowing into the funnel from a hose ....hard to speed up the flow.
3. Turbulence or water circulation inside the funnel will slow and affect the vertical descent of the water through the funnel.
To efficiently fill water into a container, use a funnel to direct the water flow and prevent spills. Position the container on a stable surface and pour the water slowly to avoid splashing. Consider using a measuring cup or pitcher for more precise pouring.
Friction in the hose causes water flow to be slower compared to the direct flow from the tap. This is due to the resistance the water encounters as it moves through the length of the hose, resulting in a longer time to fill the can. With the tap, there is a direct and unobstructed flow of water, leading to a faster fill time.
Light can fill a room without taking up physical space.
Surface tension of water allows the water in the glass to rise slightly above the rim without spilling over. This is because the water molecules are attracted to each other, creating a cohesive force that keeps the water from overflowing. However, adding too much water will eventually break this surface tension and cause spillage.
To fill a container that can hold 100 litres, you would need 100 litres of water.
Funnel
cold water fill the bladder faster then warm water.but you take the tea for hurry.
can you fill the coconut with water wthout making a hole
To efficiently fill water into a container, use a funnel to direct the water flow and prevent spills. Position the container on a stable surface and pour the water slowly to avoid splashing. Consider using a measuring cup or pitcher for more precise pouring.
where the dipstick comes out stick a funnel right in hole and fill
To make water globes, you will need glass or plastic globes, a funnel, water, and plants. Fill the globe with water using the funnel, leaving some space at the top. Insert the plant into the globe, making sure the roots are submerged in the water. Seal the globe and place it in a sunny spot. Remember to refill the water as needed to keep the plant healthy.
To fill up your water tank efficiently, use a high-pressure hose with a wide diameter to allow for faster water flow.
Through the dipstick tube with a funnel...
By putting a funnel into the dipstick tube.
Use a funnel; work in a ventilated hood.
there is a funnel you can buy that rests on top of the fill neck sealed. you fill it up, turn the car on let it run till it's warm and all the air will travel to the top of the system and exit atop the funnel, but i think this funnel is only available to mechs.
To make a toilet fill up faster after flushing, you can check the water supply valve beneath the toilet to ensure it is fully open. Additionally, clearing any clogs or blockages in the fill valve or supply line can improve water flow. If your toilet has an adjustable fill valve, increasing the float height can also help fill the tank more quickly. Lastly, consider replacing old or inefficient components with newer, faster-filling parts if needed.