0
What else can I help you with?
When a bimetallic strip is heated it bends toward the metal with the thermal expansion?
When a bimetallic strip is heated, the metal with the higher coefficient of thermal expansion expands more than the other metal, causing the strip to bend towards that metal. This bending is due to the unequal expansion and contraction of the two metals when exposed to different temperatures.
How do you screw things together?
To screw things together, first align the items that need to be joined. Insert the screw into the hole and turn it clockwise using a screwdriver or drill until it is securely fastened. Be careful not to overtighten and strip the screw or damage the items being attached.
Why dies a bimetallic strip when it is heated?
A bimetallic strip bends when heated because the two metals it is made of have different coefficients of thermal expansion. As the strip is heated, one metal expands more than the other, causing the strip to curve.
What is the standard thickness for metal strip?
The standard thickness for metal strips varies depending on the type of metal and application. Common thicknesses range from 0.005 inches to 0.25 inches for various metals like steel, aluminum, and copper. It is essential to determine the specific requirements of your project to select the appropriate thickness for the metal strip.
What happens if a balloon and a cloth after rubbing is in contact with a metal strip answers?
The balloon becomes negatively charged due to the transfer of electrons from the cloth. When the negatively charged balloon comes in contact with the metal strip, electrons will flow from the strip to the balloon, neutralizing the charge on the balloon. This process is known as static discharge.
What should you do if you strip a screw?
If you strip a screw, you can try using a rubber band or a screw extractor tool to remove it. If those methods don't work, you may need to drill out the screw and replace it with a new one.
What is the advantage of a posidrive screw over a slot headed screw?
A posidrive screw stays centered over the driving tool. On Slotted head screws, the screwdriver can slip easily out of the groove. A very nice kind of screw is the "TORX" head screw. With the proper torx bit, they cannot slip or strip easily while screwing them into wood or metal.
How do I keep my cordless screwdriver from stripping screw heads?
The best thing to do is to not drill the screw heads to far down, since it will have a tendency to strip the screw heads, you should also consider making sure you item is prefectly mounted due to the problems of the screw.
How do you attach a banana to the ceiling?
Take a hook like a command strip, screw it, tape it, or somehow atatch it to the ceiling, then peel tiny strip of the banana and screw the it through the hook
What is the strip of land separated from Israel by a metal fence?
Gaze strip
What gauge is the black wire with red strip ground from the alternator?
That particular wire is usually 10 gauge.
What is the metal strip called that holds down a rug?
That can be the carpet edging strip, the fastening strip, carpet plating strip for a few names.
What is the metal strip called that covers the edge of a carpet at a doorway?
the metal strip or anything for that matter that goes at the bottom of doorways is called a threshold.
How long will the metal strip be 5.65 cm 6.70 cm and 4.32 cm?
The total length of the metal strip is 16.67cm or 6.56 inches.
How do you field strip an Eastern Arms Company Single Shot 16 gauge shotgun?
There may be a screw under the fore end. If so, remove it. If there is no screw, or once the screw is removed, the fore end should pull away from the barrel, at its front. It may take some effort and may be held in place by spring tension. Once it comes loose, the barrel can then be opened normally, and will dismount from the receiver pivot. To reassemble, set the barrel in place, set the fore end against the receiver, and snap it back up against the barrel. Then replace the screw if there is one.
Why does a bi-metal strip bends?
A bi-metal strip consists of two metals that expand by different amounts when the temperature changes, so it will bend when heated.
Is a fuse made out of glass?
(A+) a strip of metal inside
