they'll both hold the same amount!
Adding water to a balloon changes the distribution of forces acting on it. The water inside the balloon adds weight, causing the balloon to stretch and become thinner. This makes the balloon more susceptible to popping as the tension in its material increases.
As long as it isn't excessively humid, the balloons will pick up a significant static electricity charge. Because they pick up the same charge - they will tend to repel each other, but be attracted to other surfaces including your hands - and if you want to have some fun - walls, where you can place them and have them remain more or less in place.
The length of time a balloon can stay floating depends on factors such as the type of gas used (helium vs. air), the size and material of the balloon, and environmental conditions (temperature, altitude, etc.). Generally, helium-filled balloons can stay afloat for around 12-24 hours, while air-filled balloons will eventually fall due to their weight.
The duration an air-filled balloon stays inflated can vary based on factors such as the quality of the balloon, temperature, and air pressure. Under normal conditions, an air-filled balloon can stay inflated for several days to a week before starting to deflate.
The time it takes for a balloon filled with hot water to pop can vary depending on factors such as the temperature of the water, the material and thickness of the balloon, and the surrounding environment. Generally, a balloon filled with hot water can pop within a few seconds to a few minutes as the heat weakens the structure of the balloon.
Ask someone else.
Well, honey, technically speaking, the shape of a balloon doesn't affect its speed. It's all about the air pressure inside and outside the balloon that determines how fast it can go. So, whether it's long, round, or shaped like a unicorn, as long as it's filled with enough hot air, it can zip through the sky at the same speed.
Think if your emotions like water and you hold them in a balloon. You can keep filling the balloon with water, but eventually it's going to pop and the water will spill everywhere.
As long as they have flue to heat the balloon.
It depends on how long it takes for the charge to diminish so that it can no longer hold the balloon against gravity. Principal factors will be the conductivity of the balloon's material, and the humidity of the air.
The length of time a balloon ride will take will depend on the company with which it is booked, weather and other considerations. Typically fights will last around an hour.
If you mean a hot air balloon, it is the expansion of the air caused by the propane burner. If you mean any balloon, it is the ability of the material to hold the air or gas inside which keeps it inflated.
1 balloon (round ones will work, but the longer "airship" balloons work best)1 long piece of kite string (about 10-15 feet long)1 plastic strawtapeTie one end of the string to a chair, door knob, or other support.Put the other end of the string through the straw.Pull the string tight and tie it to another support in the room.Blow up the balloon (but don't tie it.) Pinch the end of the balloon and tape the balloon to the straw as shown above. You're ready for launch.Let go and watch the rocket fly!.So how does it work? It's all about the air...and thrust. As the air rushes out of the balloon, it creates a forward motion called THRUST. Thrust is a pushing force created by energy. In the balloon experiment, our thrust comes from the energy of the balloon forcing the air out. Different sizes and shapes of balloon will create more or less thrust. In a real rocket, thrust is created by the force of burning rocket fuel as it blasts from the rockets engine - as the engines blast down, the rocket goes up!
1 balloon (round ones will work, but the longer "airship" balloons work best)1 long piece of kite string (about 10-15 feet long)1 plastic strawtapeTie one end of the string to a chair, door knob, or other support.Put the other end of the string through the straw.Pull the string tight and tie it to another support in the room.Blow up the balloon (but don't tie it.) Pinch the end of the balloon and tape the balloon to the straw as shown above. You're ready for launch.Let go and watch the rocket fly!.So how does it work? It's all about the air...and thrust. As the air rushes out of the balloon, it creates a forward motion called THRUST. Thrust is a pushing force created by energy. In the balloon experiment, our thrust comes from the energy of the balloon forcing the air out. Different sizes and shapes of balloon will create more or less thrust. In a real rocket, thrust is created by the force of burning rocket fuel as it blasts from the rockets engine - as the engines blast down, the rocket goes up!
it took about a year for the first hot air balloon to be made.
i think it takes a long time for a hot air balloon to fly
rap some tight selatape round the foreskin:], i do it often, it actuly works, you get a better longer feeling:D