A small current controls (turns on or off) a large current. Usually performed using a coil to produce a magnetic field which opens/closes an electrical switch.
when unplug ed and plug ed the power switch relay will make click if supply is in working condition to circuit. so compressor if not working the means no sound then definately it is in problem.
A relay is made up of a coil with an iron core and a movable iron bar. The movable iron bar in a relay is called a switch.
the actual r.m.s current flowing in the relay expressed as a multiple of the setting current (pick up current) is known as plug setting multiplier.mathematically ,PSM= SECONDARY CURRENT/RELAY CURRENT SETTINGorPSM= (primary current during fault)/(relay current setting *C.T ratio)
No, a bimetallic strip is not a relay. A bimetallic strip is a temperature-sensitive strip made of two different metals that expand at different rates when heated, causing the strip to bend. On the other hand, a relay is an electrically operated switch that uses an electromagnet to control the flow of current in a circuit.
A relay is an electrical switch that uses an electromagnet to control the flow of electricity, while release refers to the action of letting go or freeing something. In a relay, the electromagnet activates to switch the circuit on or off, whereas release is the process of disconnecting or stopping something.
It is possible for aÊrelay toÊstop working. A relay can overheat or stop working due to a shortage in the wiring.
The relay isn't working correctly
It is a fuse.
No, it shouldn't have anything to do with the starter. A bad fuel relay will stop the fuel pump from working.
Swap another like relay or just buy a new one.
could be the fuse, but the sunroof relay is above the sunroof switch attached to the motor, the relay is a possible answer to the sunroof not working.
that means both the relay and fuel pump are accuratelly working.
Replace the flasher relay if none of them are working.
relay is giving power to other relay pump not working
Take the relay out and hot wire the pump. If it works, its not the pump.
Bad relay, No power to relay, Wiring from relay to pump and our most likely problem is, the fuel pump is bad. changed it already
it sounds like the window relay is not working or not making good connection.....had this happen on a 1990 town car i used to own........the relay on the 1990 was behind the glove box.....you could drop the box down and thump the relay and windows would start working......finally replaced relay and no more problems..........good luck