answersLogoWhite

0

What else can I help you with?

Related Questions

What would you use to measure a bus?

The answer will depend on what characteristic of the bus you wished to measure: its length, weight, colour, fuel efficiency, capacity, top speed, etc. Each of these would require a different method and a different measurement unit.


What would use to measure a bus?

The answer will depend on what characteristic of the bus you wished to measure: its length, weight, colour, fuel efficiency, capacity, top speed, etc. Each of these would require a different method and a different measurement unit.


In a bus network if the ends of the cable aren't terminated What is occurs?

The unterminated end presents an impedance mismatch or 'bump'. This causes a reflection of the original signal to propagate back down the bus, which destructively combines with and degrades the desired waveform. For this to be avoided, the bus must be terminated with a resistance equal to its characteristic impedance.


What is the characteristic of the bandwidth of a bus topology?

In a bus topology, the bandwidth is shared among all devices connected to the bus, leading to a limitation in data transmission rates as multiple devices communicate simultaneously. This can result in network congestion, particularly as the number of connected devices increases. Additionally, the overall bandwidth is determined by the capacity of the bus itself, which can be a bottleneck if not appropriately managed. Consequently, performance can degrade with heavy network traffic.


What does the word property mean in math form?

Characteristic. Characteristic. Characteristic. Characteristic.


When was A Bus for a Bus on the Bus created?

A Bus for a Bus on the Bus was created on 1979-07-25.


What are two other names for the system bus?

System bus, memory bus, front side bus (FSB), host bus, local bus, or external bus.


What are two other names for system bus?

System bus, memory bus, front side bus (FSB), host bus, local bus, or external bus.


What number school buses have at cub run elementary school peen laird?

bus 159 bus 209 bus 35 bus 96 bus 186 bus 207 bus 153 bus 176 bus 226


Is it 'on the bus' or ''in the bus'?

Both are correct, with different meaning. On the bus means "taking a bus trip." In the bus means "actually inside the bus."


What is the Main Function Of System Bus?

The bus between the CPU and memory on the motherboard. Also called the memory bus, front-side bus, local bus, or host bus.


Is it ride in the bus or ride on the bus?

Strictly speaking, you would ride "in the bus" because to be "on the bus" would mean that you are on the roof. However, people often say that they ride on the bus when they mean that they are sitting or standing inside it.