there is track width (measured from mid rail to mid rail) and track gauge (measured from inside rail to inside rail. As that is the most important size of track, that is normally the distances referenced to. normal distance for track gauge is 1435 mm
Karen Lee Ryan has written: 'Secrets of Successful Rail-Trails' '40 great rail-trails in the Mid-Atlantic' -- subject(s): Guidebooks, Rail-trails, Outdoor recreation
Mid point of van, on the inside of the passenger side "frame rail"
Drivers side, against frame rail, mid section.
Should be located under vehicle on frame rail about mid way of the drivers door.
Driver side frame rail, mid way back. Its an inline metal canster.
Possibly the fact that there weren't a lot of highway-capable cars in the mid 1800s?
Travel by rail became available in the early 19th century, with the first successful steam locomotive, the Locomotion No. 1, operating on the Stockton and Darlington Railway in England in 1825. This marked the beginning of railway travel for passengers, which rapidly expanded throughout the 1830s and 1840s, transforming transportation and commerce. By the mid-19th century, rail networks had developed extensively in Europe and North America, making rail travel a popular mode of transport.
your fuel filter should be along your frame rail almost mid point under your truck if not it could be in your fule tank good luck drive safe Usually along the frame rail or in front of the tank--follow the fuel lines Usually along the frame rail or in front of the tank--follow the fuel lines
If leaking from the rail itself, the rail will need replaced. If leaking from a seal at the rail, replace the rail.
A Hogged Rail is the surface defect of the rail in which the rail ends are bent downword at the joints.
rail bandit, rail crimer,rail criminal,railobber,rail crook and racket