Want this question answered?
Be notified when an answer is posted
Right hand thread
Not all crankshaft pulley bolts are left hand thread. In my experience if it is a left hand thread the bolt head normally has an L stamped on it to notify the direction of thread
i have acquired a clothes pulley and do not know how to feed the rope through for operation
Right hand thread
Yes, a pulley system can be used to hang up clothes by attaching the clothesline to the pulley and using it to raise or lower the clothes. This can be particularly useful for hanging clothes in a high or hard-to-reach area.
My grandmother sews with a needle and thread. She lost the thread of the conversation. Help me thread the rope through the pulley. The girls was threading beads on a string.
Tensioner assembly removes with std. thread -- pulley itself is a left handed thread Clockwise to loosen
The answer is probably a pulley. That's probably the answer because tautness means tight or tightly and a pulley causes a thread or a rope to be pulled tightly or tautly.
Easy, remove tensioner pulley (13mm left handed thread). Replace pulley Remove 2nd pulley (13mm I think, normal thread) Remove 3rd pulley (13mm I think, normal thread, found below 2nd pulley) Look up VY pulley on google to get a diagram and parts numbers. its simply a matter of unscrewing the bolt and sliding a new pulley in. might as well do drive belt while your there. Costs around $100 all up and takes under an hour :D
facing the engine you turn to the right it is r/ hand thread if you look at tne bolt head which is behind the pulley
To put a string through a double pulley, first thread the string through one side of the pulley. Then, loop the string around the groove of the pulley and thread it through the other side. Make sure the string is running smoothly through both sides of the pulley before using it.
No.