change the direction of force
The 1994 would have a bolt on pulley while the 1998 had a pressed on pulley. Other than that they are same. A new pump would be of the pressed on pulley style.The 1994 would have a bolt on pulley while the 1998 had a pressed on pulley. Other than that they are same. A new pump would be of the pressed on pulley style.
Either someone has used a belt dressing that left a residue on the pulley or there is a bearing oil seal leaking in the vicinity of the pulley. A few more details of the pulley's environment would be helpful.
No it is a lever because you are pushing it forward. If it was a pulley, you would pull it and the object would come down.
Hs
That would be the crankshaft pulley.
One fixed pulley and two moveable pulleys would give a mechanical advantage of 3. The rope would go through the fixed pulley, then the first moveable pulley, back through the fixed pulley, and finally through the second moveable pulley.
Look behind the driver wheel at the cranckshaft pulley. There will be a sensor there. It is the pulley with the teeth.
It would depend on what you want to use the belt and pulley for
You can find information about weight pulley on many websites. Some of these places are www.nextag.com/pulley-weights/shop-html and www.weightsandpulleys.com.
A pulley system that has multiple pulleys in line with each one having its output drive the next will increase the force. This would be called a tackle pulley.
On Google images, search "diagram of pulley system for 1998 Isuzu trooper"
Yes, for example you would want to move a gear so you would pull on one side of the pulley and it could get where you want it to get.