answersLogoWhite

0

Belt is probably broken. Many dryers have fan either directly connected to the motor or on separate motor. Fan may be pulling in the hot air, but belt is broken, so motor is not turning the drum.

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

Why is my dryer not working properly and the drum won't turn on?

There could be several reasons why your dryer is not working properly and the drum won't turn on. Some common causes include a broken belt, a faulty motor, or a problem with the drum rollers or bearings. It is recommended to check these components and consult a professional if needed for further diagnosis and repair.


Why do clothes pockets turn inside out in a clothes dryer?

Clothes pockets turn inside out in a clothes dryer due to the tumbling motion during the drying cycle. The pockets get caught on other clothes or the dryer drum, causing them to become inverted. To prevent this, emptying pockets before putting clothes in the dryer can help.


Roper Elec Dryer RED4440VQ1 dryer will not turn on or heat up. Fuse is good. power outlet is good.?

Check the timer, with it set to a run position 110volts ac should be on the light blue wire tied to term "B" of timer. Mine had a broken plastic part inside the timer that prevented the contacts from closing.


When you turn on a clothes dryer energy is released and used Describe the energy transformations that occur in this example.?

In a clothes dryer, electrical energy is transformed into mechanical energy to spin the drum and thermal energy to create heat. The thermal energy then transforms to radiant energy to dry the clothes by evaporating the water.


Does the sun's energy heat the air close to earth?

Not directly. The sun's energy heats the ground, which in turn heats the air above it.


How do I set tumble dry low in the drying machine?

The settings on a dryer differ by manufacturer. A coin operated dryer has a slide or dial to turn the dryer to a lower temperature. A digital dryer has buttons to push to change the temperature settings. Many dryers just have a dial to turn to select the temperature or timer settings.


How can I properly install a dryer connection to the wall?

To properly install a dryer connection to the wall, follow these steps: Turn off the power to the dryer and unplug it. Locate the electrical outlet and ensure it is compatible with the dryer's plug. Install a proper outlet box and secure it to the wall. Connect the wires from the outlet box to the corresponding terminals on the dryer. Secure the dryer vent hose to the back of the dryer and the wall vent. Plug in the dryer and turn on the power to test the connection. It is recommended to consult a professional electrician if you are unsure about any step in the installation process.


How do you direct air flow when using a hand held dryer?

turn it on


How to connect a dryer properly?

To connect a dryer properly, first make sure the electrical outlet matches the dryer's plug. Then, attach the vent hose securely to the back of the dryer and vent it outside. Finally, turn on the gas or electricity supply and test the dryer to ensure it is working correctly.


Why does the train have a firebox?

The firebox heats the water and as steam flows the wheels turn.


How can I properly install a pigtail for a dryer?

To properly install a pigtail for a dryer, first turn off the power to the dryer. Then, remove the old pigtail by disconnecting the wires and unscrewing it. Next, connect the new pigtail wires to the corresponding terminals on the dryer, following the manufacturer's instructions. Finally, secure the connections with wire nuts and tighten any screws. Turn the power back on and test the dryer to ensure it is working properly.


When you turn on your new tumble dryer what would cause the electricity to trip in all the sockets?

The dryer plug is probably wired wrong, check where the cord is wired to the dryer first. Unplug the dryer befor starting to remove any screws or panels