0

Search results

On a Mazda tribute, the car with a key light indicator means that the engine is started.

1 answer


I have a 2004 Odyssey. Here's what the manual has to say about the green key indicator on the instrument panel: "Immobilizer System Indicator. This indicator comes on when you turn the ignition switch to ON. It will then go off if you have inserted a properly-coded ignition key. If it is not a properly-coded key, the indicator will blink and the engine will not start. This indicator also blinks several times when you turn the ignition switch from ON to ACCESSORY or LOCK." Hope this helps!

1 answer


there is a hole for your key underneath the indicator...just stick your key in there and it will reset back to green

1 answer



Still have questions?
magnify glass
imp

key performance indicator

1 answer


The red dot is an indicator for a failure in the theft/sentry key system. The sentry key system is for the key with "chips" in them.

The red dot is an indicator for a failure in the theft/sentry key system. The sentry key system is for the key with "chips" in them.

2 answers



There is a malfunction in the "chip" key system.

1 answer


The red round circle light is the indicator for a failure in the theft alarm or Sentry Key (chip key) system.

The red round circle light is the indicator for a failure in the theft alarm or Sentry Key (chip key) system.

2 answers


The full form of KRI is Key Risk Indicator. It is a metric used in risk management to signal changes in risk levels within an organization.

2 answers


Pres the "FN" key while hitting the NumLock (Num) key one OR MORE times,

depending on the sign on the "Status indicator panel" (E-Series). When the Num Lock indicator has vanished, the FN key is deactivated.

1 answer


The red round circle light is the indicator for a failure in the theft alarm or Sentry Key (chip key) system.

The red round circle light is the indicator for a failure in the theft alarm or Sentry Key (chip key) system.

2 answers


THANKS BUT I FOUND ANSWER.................The Engine Immobilizer Indicator Light is supposed to flash continually when your key is removed from the ignition

1 answer


Earnings and earnings/revenue growth.

---------------------------------------------------

A performance indicator or key performance indicator (KPI) is a measure of performance. Such measures are commonly used to help an organization define and evaluate how successful it is, typically in terms of making progress towards its long-term organizational goals.

1 answer


Penunjuk Prestasi Utama

1 answer


Key performance indicators are specific metrics that show whether a company is meeting its marketing goals.

1 answer


Key Programming -- Spare

Cycle the ignition switch from OFF to RUN using a programmed key. After the anti-theft indicator goes off, remove the key.

Within 15 seconds, insert a new encoded key into the ignition. wait till the anti-theft indicator goes off, turn key to Run/ START

1 answer


Push your key into the little recessed button on the instrument panel right next to the maintenance indicator. Should turn green.

1 answer


The Green key symbol illuminating tells you that the immobilizer system has activated. Typically this indicator will come on when you first turn the ignition switch ON. It will go

off if you are using a properly coded key for your vehicle. If the indicator is blinking, it does not recognize your key as the correct one for your vehicle and the vehicle's fuel system will be disabled.

1 answer


is ssumary of the privious day's critical activities

1 answer


The production of heat in this chemical reaction is a key indicator of its exothermic nature.

1 answer


It is telling you that you have left the keys in the ignition.

1 answer


A small round red light is an indicator of a malfunction in the anti theft/chip key system.

A small round red light is an indicator of a malfunction in the anti theft/chip key system.

2 answers


turn the key to on possition pump the gass pedal all the way to the floor 5 times then turn the key to the off possition then it shoud reset. Undo the battery for 10 minutes and it will clear the indicator.

1 answer


One key indicator of climate change is the increase in global average temperatures. This can lead to changes in weather patterns, sea level rise, and the melting of ice caps and glaciers.

2 answers


Use your key and insert it into the slot next to the maintenance indicator, which I suppose is red if you're asking this question. It should be the only slot on your instrument panel. This will reset your indicator to green.

1 answer


The key fob will have an indicator on it that says "Start"

1 answer


turn the key on, engine off, press the gas pedal to the floor three times. cycle key

1 answer



The Engine Immobilizer Indicator Light is supposed to flash continually when your key is removed from the ignition because it is part of the security/alarm system. The engine immobilizer is the " kill switch " that will not allow the engine to be started without your key which has a microchip in the top ( the black part of the key ). When the EII Light is flashing it indicates that that part of the alarm system is active and working. If the light does not blink when key is removed THEN it needs to be fixed.

1 answer


Key Duplication: 1) Insert Original Key In IGN / Turn 'ON' For FIVE Seconds 2) Insert Duplicate Key In IGN / Turn 'ON' For FIVE Seconds 3) When Indicator Light Goes Off, New Key Is Programmed Key Origination: 1) Insert New Key In IGN 2) Turn Key 'ON' 3) Indicator Light Will Remain 'ON' For 10-15 Minutes 4) As Soon As The Light Goes Off, Turn Key To Off Position 5) Within One Minute Turn Key To 'ON' Position 6) Repeat Steps 2-5 Two More Times 7) After Third Cycle, New Key Is Programmed

1 answer


If the car is not in park, it wont release the key. If it is in park, there is a little switch underneath the prndl indicator that is bad, causing the car to not release your key.

1 answer


instert key into slot right below oil light indicator.

1 answer


a leading indicator is a set of key variables that economists use to predict phase of a business cycle, and a stock market, typically, turns sharply downward before a recession begins.

1 answer


Malfunction Indicator Light (MIL) commonly refered to as the check engine light

Key On Engine Off (KOEO)

1 answer


push key into the slot to reset.turns red every 6000 miles.

1 answer


turn key on/engine off. step on gas pedal 5 times light should go out. key off. start engine and check lite.

1 answer


Turn key to on position with out starting. Press the select/reset knob until the "engine oil life indicator" is displayed. Hold down the knob for at least 10 seconds. The "engine oil life indicator" will blink. Hold down the select/reset knob for at least 5 seconds. The "engine oil life indicator" will be reset to 100%.

1 answer


Key off.....Turn key to ignition WHILST holding the up & down buttons on the speed alert. The indicator will beep & "service confirmation?" will be displayed on the screen...pause for 3 seconds then press & hold the "set" button. The indicator will again beep & "no items" will be displayed

2 answers


Turn the ignition key to the ON position (don't start the engine) and pump the accelerator three times within 10 seconds. Turn the key to OFF.

1 answer


It's to check the immobilisor is working correctly when the car is started, if it flashes when car is started it means there is a fault

1 answer


Yes, it's one of the indicators. Oceans absorb heat just as much as the surface of the earth.

1 answer


If it's a newer truck, you turn the key to the 'on' position, and pump the gas pedal 6 times.

1 answer


disconnect the battery for 10 mins or turn the ignition switch back and fourth with the key in it

1 answer


The red circle warning light is the indicator for the sentry key and theft alarm systems.

1 answer


Key off

Press and hold clock button on dash

turn key to on positions (do not start car) and wait 10 seconds

turn off key and release button

Start car ... indicator should be reset.

1 answer


Turn key on, do not start,
Then push the gas pedal all the way to the floor 3 times then turn key off. and then start engine. Light will go out in a few seconds.

1 answer


Some Key Performance Indicators in telesales is how long the call lasts, the customer's perception of the salesperson and how many sales are made each hour. These KPIs are then used to evaluate the employee.

1 answer


Try this, turn key on ( not start ) press gas pedal down three times ( not too fast ) and turn off key.

Start motor and the light should be off.

1 answer


its an indicator

1 answer