A 240V dryer requires a special type of electrical outlet called a NEMA 14-30 outlet.
Yes, some dryers require a 240v outlet for proper operation.
No you can only have one dryer on a 240v circuit and nothing else can be attached to it either considering your using a 240v electric dryer
Chances are there is more than 1 outlet connected to the 110volt circuit you are looking to convert. So therefore the easy answer is No. The 240volt dryer circuit must be a dedicated single circuit for the dryer only.
The UK uses 240V, so your dryer will probably work, as the US uses 240v in homes for dryers. However, your washer won't as the US uses 120V for washers.
You will have to install a double pole breaker in the fuse panel and then run new wire (10/3) to the location of the dryer and install the proper plug. You will need a 4 prong plug; the older 3 wire plugs no longer meet code for new work.
In North America, the standard is 240V, 60Hz.
Installing a 30A 240V GFI breaker for a dryer should be fine as long as the wiring and dryer itself are compatible with the breaker. The GFI breaker is designed to protect against electrical faults and should not be affected by the cycles of the dryer. Make sure to follow the installation instructions carefully to ensure proper functioning.
Using a dryer vent vacuum to clean out lint and debris from your dryer vent can prevent fires, improve dryer efficiency, and extend the lifespan of your dryer.
240V appliances, such as range, dryer, air conditioner.
Don't understand this question. If the breaker is on, then the dryer would function normally, if the breaker your are referring to is the one for the dryer. If the breaker is off then no function. A dryer runs on 220.
To connect a dryer to a gas line, you will need a gas line adapter.