All of these ideas are good. But, before you start this process, check to be sure that all of your outlets are sealed. Once of ours had been accidentally propped open by a pillow, causing the suction to be severely reduced. It was a very easy fix, but a waste of an hour for me for not checking it first.
1. Check your hose first. Check the hose by dropping a nickle in the handle end to see if it makes it through the hose to the other end. If so, plug the hose into an inlet. A dinner knife put through the hose may help dislodge a clog.
2. At the handle end of your hose, cover the opening. Keep it covered for 10 to 15 seconds. Pull your hand away. If you hear a slight hiss followed by a reduction in suction then you have a clog.
3. You will have to unclog your system with another vacuum. Disconnect your central vac dirt canister. Go to each inlet, insert the hose end of another vacuum into the opening at each inlet. (You may have to wrap Duct Tape around the hose end to insure a snug fit)
4. Once you have unclogged your system and removed the debris, reconnect your dirt canister, and run a Tornado Power Cloth through your tubing from each valve to remove any remaining debris. It is a good idea to use these cloths on a monthly basis to prevent future clogs.
How do I get rid of a mega-clog?
1. Purchase an inexpensive plumber's snake from your local home center. It should be no longer than 15ft.with an auger end.
2. It will help to purchase a commercial hose cuff with a metal end to help you activate the valve right at the opening. These are available from any central vacuum retailer, either in your local market or online.
3. Insert the snake into the valve until it will no longer move. At this point, give the snake right turn twists to help it pass the fittings it encounters.
4. Once the snake refuses to move any further, begin to pull back on the snake until the auger tip comes out and hopefully some of the debris with it.
5. Insert the hose cuff into the valve, cover the cuff opening with your hand, let the suction build, and quickly remove your hand. What did not come out with the snake should begin to be pulled through to the unit.
6. You may have to do this several times at the effected valves to totally clear them.
I use a shop vac and reduce the vacuum hose down to fit the drain tube and suck the dirt out.
Clear or unclogged.
Disconnect the hose and put a dinner knife down the hose and the weight of it should shift whatever is stuck if you "wave the hose" gently. Alternatively, if you have a vacuum that exhales air, you can try that as well.
A plumber will unclog a blocked toilet. Due to the expense of calling a plumber you would be advised to try and clear the blockage yourself using a plunger or a plumbing snake to push the blockage through the toilet outlet.( A plumbing snake can be fashioned from a wire coat hanger). Another way to clear a clogged toilet is with baking soda and vinegar which is added to the toilet bowl and can help to clear blockages. If the toilet is clogged by a blockage that has occurred in the pipe work to the sewers then you will have to employ a plumber to solve the problem.
More than likely, the clog is a clump of algae / mold. A solution of bleach and water cold help reduce the growth. A quicker solution is o replace the line, but it may not be accessibleAnswerHere's an excellent video on how to clean out the line. It's got a ton of hits and many compliments. It helped me last summer. Saved about $150 on a service call. http://youtu.be/1eJzbidGrtoAnswerThe Easy Way To Clear Your A/C Drain Line acdrainpump.comhttp://www.youtube.com/user/TheMightyPump
To fix a clogged AC drain line, you can try using a wet/dry vacuum to suction out the blockage or use a mixture of vinegar and water to flush out the line. If these methods don't work, you may need to call a professional HVAC technician to help clear the clog.
The steam from the shower acts as a decongestant which helps clear your sinuses out. Taking a hot shower is often recommended by the doctor when your sinuses or airways become clogged.
If the converter is clogged it must be replaced. You cannot unclog it either on or off the vehicle.
Common signs of a clogged condensate drain in an air conditioning system include water leaks around the unit, musty odors, and reduced cooling efficiency. Solutions for a clogged condensate drain include using a wet/dry vacuum to clear the blockage, flushing the drain line with a mixture of water and vinegar, or contacting a professional HVAC technician for assistance.
Vacuum them into the filter.
vacuum
A bit of the old carb cleaner dose the trick.