0
What else can I help you with?
A light bulb is hanging in the first floor of the room There are three switches in the ground floor room One of these switches belongs to that light bulb The light bulb is not lit and the switches?
Turn on one of the switches and leave it on for a few minutes. Then turn it off and turn on another switch. Proceed upstairs and touch the light bulb. The bulb that is warm corresponds to the switch you turned on first, and the bulb that is off and not warm corresponds to the switch you turned on second.
Can a CFL bulb be used with a pull chain switch?
Yes, it can. CFL's are good- they don't burn as much and they're good for the environment.
How does a light bulb dimmer switch work to adjust the brightness of a light bulb?
A light bulb dimmer switch works by controlling the amount of electricity flowing to the light bulb. By adjusting the voltage, the dimmer switch can regulate the brightness of the light bulb.
What circuit do you need for two switches one bulb?
wiring diagram of one bulb in two switches.. example, if switch a- on then switch b- off the bulb is on, switch a- off then switch b- on the bulb is on, switch a- on then switch b- on the bulb is off, switch a- off then switch b- off the bulb is off..
What could you add to the circuit to control the bulb?
Switch
Why does the light bulb stay on when the switch is off?
When the light bulb stays on when the switch is off, it is likely due to a wiring issue or a faulty switch that is not properly cutting off the electricity flow to the bulb.
How do you replace bulb on fan switch Toyota avensis?
How to change bulb behind switch of fan Toyota Avenses
What is the switch and the bulb in electricity?
A switch is used of stop the current flow in a circuit and the bulb can be classed as the load in a circuit.
Can you use g9 bulb on a dimmer switch?
It is generally not recommended to use a G9 bulb on a dimmer switch unless the bulb is specifically marked as dimmable. Using a non-dimmable bulb on a dimmer switch can cause flickering, buzzing, and even damage to the bulb or the dimmer switch. Always check the bulb packaging to ensure it is compatible with dimmer switches before using them together.
What is the difference if a switch is before or after a bulb in a circuit?
It is a safety concern. With the switch before the bulb, the bulb is completely isolated from the potential source when the switch is turned off. With the switch behind the bulb, even if the switch is turned off, the potential source is still at the bulb. If any of these lamp holder parts touch the ground when removing the bulb the circuit will short out and trip the breaker. If you are grounded and touch any of the lamp holder parts you will get a nasty shock.
When the switch is closed which light bulb will light light bulb 1 2 or 3?
It depend on where the switch is located in the circuit.
What are the safety tips when changing a bulb?
The floor should be clean and dry to avoid slippage of the ladder. It is recommended to use a step ladder. You should also make sure that the switch for the light bulb is turned off before you start work.
