To replace the heater core in a 1993 Geo Storm with air conditioning, first, disconnect the negative battery terminal and drain the coolant from the radiator. Remove the dashboard, which involves taking out the instrument panel and any necessary trim pieces. Then, disconnect the heater hoses from the core and remove the mounting bolts to extract the old heater core. Install the new core, reassemble the dashboard, and refill the coolant before reconnecting the battery.
To replace your heater core on a 1993 caprice, you will need a screwdriver, a socket wrench, and a weather seal adhesive.
Very hard.
It's tough for an amateur. The heater core is inside behind the console.
You can find the heater core behind the kick plate in your 1993 Acura Legend. Remove the water hoses. Remove the heater core retaining bolts. Reverse the process to install the new heater core.
To replace the heater core in a 1993 Mercury Grand Marquis, first, disconnect the battery and drain the cooling system. Remove the dashboard and the center console to access the heater core housing. Disconnect the heater core hoses from the engine bay, unbolt the heater core from its housing, and then replace it with the new one. Reassemble the components in reverse order, refill the cooling system, and check for leaks.
Drain the water from your 1993 Chevy Lumina cooling system. Remove the water supply hoses to your heater core. Remove the heater core retaining bolts. Reverse the process to install the new heater core.
specs on how to replace a heatercore on a 1993 ford explorer
Passenger side, near the firewall. It is not difficult to replace, it is just very difficult to get to.
your better off asking if its worth it its a lot
To replace the heater core in a 1993 Chevy Corsica, first, you'll need to disconnect the battery and drain the coolant from the radiator. The heater core is located inside the dashboard, so you must remove the dashboard assembly and the center console to access it. Disconnect the hoses connected to the heater core, remove the mounting screws, and replace it with the new unit. Reassemble everything in reverse order, refill the coolant, and check for leaks.
it depends on the shop but it takes 6.3 hours
loosen the clamp holding the hose on to a fitting and pull the hose free.